If your Vgotel New 10 is experiencing software-related problems such as hang on logo, bootloop, DM Verity errors, system corruption, or dead boot, installing the correct stock firmware can help restore the device to its original software condition.
This page provides the tested firmware package for the Vgotel New 10 based on the MediaTek MT6739 platform. The firmware package can be useful for repairing various software problems and returning the device to a clean stock ROM.
Vgotel New 10 Firmware Information
| Device | Vgotel New 10 |
|---|---|
| Chipset | MediaTek MT6739 |
| Firmware Type | Stock ROM / Official Firmware |
| Android Version | Android 12 |
| Build | SP1A.210812.016 |
| Board | k39tv1_bsp_1g_k419 |
| Firmware File | MT6739_SSH_Telecom_SMC_PVT_LTD_NEW_10_OSv12 |
| Firmware Date | 2025-02-12 |
Problems This Firmware May Help Repair
The Vgotel New 10 stock ROM can be useful when the device has software or boot-related problems. Depending on the condition of the phone, flashing the correct firmware may help with:
- Vgotel New 10 stuck on logo
- Bootloop and repeated restarting
- DM Verity verification errors
- System software corruption
- Software update failure
- Boot failure after an incorrect software installation
- Dead boot caused by software-related issues
- Unstable or corrupted Android system
- Restoring the phone to stock firmware
Vgotel New 10 Stock ROM Download
You can download the Vgotel New 10 firmware package from the link below. The package name is:
MT6739_SSH_Telecom_SMC_PVT_LTD_NEW_10_OSv12_SP1A.210812.016_k39tv1_bsp_1g_k419_VGO_TEL.2025-02-12_21-34-24.7z
Download Vgotel New 10 Stock Firmware
SP Flash Tool for Vgotel New 10
Because the Vgotel New 10 is powered by a MediaTek MT6739 chipset, an appropriate MediaTek flashing utility may be required to install the firmware. You can get the recommended SP Flash Tool from the following page.
MTK USB Drivers
Before connecting the Vgotel New 10 to a Windows computer, make sure the required MediaTek USB drivers are properly installed. These drivers help the computer communicate with the MediaTek device during the flashing process.
How to Flash Vgotel New 10 Firmware
- Download the Vgotel New 10 firmware package from the link provided above.
- Extract the downloaded .7z firmware archive using a suitable extraction program.
- Install the required MediaTek USB drivers on your Windows computer.
- Download and open the compatible SP Flash Tool.
- Load the required scatter file from the extracted firmware folder.
- Choose the appropriate flashing mode according to the condition of the device.
- Power off the Vgotel New 10 completely.
- Connect the phone to the computer using a good-quality USB cable.
- Start the flashing process and wait until the tool completes the operation.
- After successful flashing, disconnect the phone and power it on.
Vgotel New 10 MT6739 Firmware
This Vgotel New 10 firmware is intended for the specific MT6739-based software configuration listed above. It is recommended to compare the device information and firmware build before starting the flashing procedure.
If the phone is completely dead, first confirm that the problem is software-related. A hardware fault, damaged storage, power-management problem, charging issue, or other board-level failure may require hardware diagnosis instead of firmware flashing.
Final Words
The Vgotel New 10 MT6739 stock ROM can be a useful software repair package for technicians and users working on boot problems, DM Verity errors, system corruption, bootloops and devices stuck at the startup logo. Always use the correct firmware and flashing method for the exact device variant.
Firmware: Vgotel New 10 MT6739 Stock ROM
Flash Tool: SP Flash Tool
Drivers: MTK USB Drivers