Tecno Spark 10 5G KI8 Stock ROM | Flash File Firmware

📶 Tecno Spark 10 5G KI8 Stock ROM | Official Firmware Flash Guide

⚠️ IMPORTANT: This guide is for educational purposes only. We don't provide direct firmware downloads. Always obtain official KI8 firmware from authorized sources.

🔍 KI8 Firmware Details

Device Model
Tecno Spark 10 5G (KI8)

Chipset
MediaTek Dimensity 6020

Android Version
Android 13

📋 Pre-Flash Requirements

🔋 60%+ battery (critical for 5G devices)
💾 Backup all data (contacts, messages, media)
🖥️ Windows 10/11 PC (admin rights required)
📌 Original USB cable (USB 3.0 recommended)
⚙️ SP Flash Tool v5.2316+
💿 MediaTek VCOM drivers

⚡ Flashing Procedure

1. Software Setup:
Extract firmware package → Install SP Flash Tool as Administrator

2. Load Scatter File:
Click "Choose" → Select MT6833_Android_scatter.txt

3. Connect Device:
Power off → Hold Volume Down + Power → Connect USB

4. Start Flashing:
Click "Download" → Wait 20-30 minutes

5. First Boot:
Disconnect → Power on (first boot takes 8-12 minutes)

🔧 Common Issues Fixed

Problem	Solution
5G not working	Flash modem.img
Boot loop	Format + Download
IMEI loss	Restore NV data
Touch issues	Replace touch driver

💡 Pro Tip: After flashing, perform factory reset for optimal 5G performance.

✅ Post-Flash Checklist

Verify 5G connectivity
Check IMEI (*#06#)
Test all network bands
Update system apps

📢 LEGAL: Tecno Spark 10 5G firmware is proprietary. Follow local laws regarding device modification.

Download the necessary tools and drivers:

MTK USB Drivers SP Flash Tool (with Auth Bypass) DA Auth File SP Flash Tool V5 1824

ROM Tecno Spark 10 KI8 MT6833 GL V2342

Firmware4mobile