Tecno Spark 10 KI5Q Stock ROM | Flash File Firmware | Display Flicker Solution File

📱 Tecno Spark 10 KI5Q Stock ROM | Official Firmware Fix Guide

⚠️ IMPORTANT: This guide is for educational purposes only. We don't provide direct firmware downloads. Always obtain official KI5Q firmware from Tecno Mobile authorized sources.

🔍 KI5Q Firmware Specifications

Device Model
Tecno Spark 10 (KI5Q)

Chipset
MediaTek Helio G37

Android Version
Android 13

📋 Preparation Checklist

• ✅ Confirm KI5Q model (Settings → About Phone)
• ✅ 50%+ battery (recommended for stable flashing)
• ✅ SP Flash Tool v5.2208+ (for MediaTek devices)
• ✅ MediaTek USB Drivers (properly installed)
• ✅ Original USB cable (data transfer capable)
• ✅ Backup important data (flashing erases everything)

⚡ Flashing Process Step-by-Step

1. Software Setup:
Download firmware package → Extract files → Install SP Flash Tool as Admin

2. Load Scatter File:
Open SP Flash Tool → Click "Choose" → Select MT6765_Android_scatter.txt

3. Connect Device:
Power off phone → Hold Volume Down → Connect USB cable

4. Start Flashing:
Click "Download" button → Wait 15-25 minutes (progress bar will complete)

5. First Boot:
Disconnect → Hold Power 10 sec → Initial setup takes 5-10 minutes

🔧 Common Software Issues Fixed

Issue	Solution
Boot loop	Flash complete firmware
Hang on logo	Format + Download option
No network	Flash modem.img separately
Touch issues	Replace touch driver files

✅ Post-Flash Verification

• 🔍 Check IMEI (*#06#)
• 📶 Test all network bands
• 📷 Verify camera functionality
• 🔋 Monitor battery performance
• 🔄 Check for OTA updates

📢 LEGAL: Tecno Spark 10 KI5Q firmware is proprietary software. We don't host or distribute copyrighted material. Follow local laws regarding device modification.

Download the necessary tools and drivers:

MTK USB Drivers SP Flash Tool (with Auth Bypass) DA Auth File SP Flash Tool V5 1824

ROM Spark_10_KI5Q_MT6765_V221