Tecno Spark 10 KI5N Stock ROM | Flash File Firmware | Software Repair for Blinking Logo

📱 Tecno Spark 10 KI5N Stock ROM | Official Firmware Fix Guide

ℹ️ NOTE: This guide provides the official flashing method for Tecno Spark 10 KI5N. We do not provide direct firmware downloads.

🔧 KI5N Firmware Details

Model Variant
KI5N (Spark 10)

Chipset
MediaTek Helio G37

Android Version
Android 13

📋 Before You Begin

• 🔋 Charge to 50%+ (prevents power failure during flash)
• 💾 Backup all data (contacts, messages, media files)
• 🖥️ Windows 10/11 PC (admin privileges required)
• 📌 Original USB cable (data transfer capable)
• ⚙️ SP Flash Tool v5.2208+
• 💿 MediaTek VCOM drivers

⚡ Flashing Procedure

Step 1: Extract firmware package → Install SP Flash Tool as Administrator

Step 2: Load scatter file (MT6765_Android_scatter.txt)

Step 3: Power off phone → Hold Volume Down → Connect USB

Step 4: Click "Download" → Wait 15-20 minutes

Step 5: Disconnect → Power on (first boot takes 5-8 minutes)

🔍 Common Issues Fixed

Problem	Solution
Boot loop	Full firmware flash
Hang on logo	Format + Download
No signal	Flash modem.img
Touch issues	Replace touch driver

💡 Tip: After flashing, perform factory reset for optimal performance.

✅ Post-Flash Checklist

• Verify IMEI (*#06#)
• Test WiFi/Bluetooth
• Check camera functions
• Update system apps

📢 Disclaimer: Firmware is copyrighted material. Follow local laws regarding device modification.

Download the necessary tools and drivers:

MTK USB Drivers SP Flash Tool (with Auth Bypass) DA Auth File SP Flash Tool V5 1824

ROM Tecno_Spark_10_KI5N_MT6765_V491