⚠️ DISCLAIMER: This guide is for educational purposes only. We don't provide direct firmware downloads. Obtain official LH8n files from Tecno authorized sources.
š LH8n Firmware Details
Device Model
Tecno Pova 5 Pro (LH8n)
Tecno Pova 5 Pro (LH8n)
Chipset
MediaTek Helio G99
MediaTek Helio G99
Android Version
Android 13
Android 13
š Pre-Flash Checklist
- ✔️ Confirm LH8n model (Settings → About Phone)
- ✔️ 60%+ battery (critical for G99 chipset)
- ✔️ SP Flash Tool v5.2316+
- ✔️ MediaTek USB Drivers
- ✔️ Original USB 3.0 cable
- ✔️ Backup gaming profiles (Pova-specific)
⚡ Flashing Procedure
1. Extract Files:
Unzip firmware package → Locate scatter file (
Unzip firmware package → Locate scatter file (
MT6789_Android_scatter.txt)
2. Configure SP Flash Tool:
Load scatter file → Select "Download Only" mode
Load scatter file → Select "Download Only" mode
3. Connect Device:
Power off → Hold Volume Down + Power → Connect USB
Power off → Hold Volume Down + Power → Connect USB
4. Start Flashing:
Click "Download" → Wait 25-35 minutes (Helio G99 process)
Click "Download" → Wait 25-35 minutes (Helio G99 process)
5. First Boot:
Disconnect → Power on → Setup takes 8-12 minutes
Disconnect → Power on → Setup takes 8-12 minutes
š® Gaming Performance Fixes
| Gaming Issue | Solution |
|---|---|
| Overheating | Update thermal config |
| Frame drops | Optimize GPU drivers |
| Touch latency | Recalibrate touchscreen |
| Battery drain | Reset power profiles |
✅ Post-Flash Checks
- šÆ Test gaming performance
- š Verify battery optimization
- š¶ Check network stability
- š Run OTA update
š¢ LEGAL: Tecno Pova 5 Pro firmware is proprietary. Follow local laws regarding device modification.
Download the necessary tools and drivers:
MTK USB Drivers SP Flash Tool (with Auth Bypass) DA Auth File SP Flash Tool V5 1824