📸 Tecno Camon 20 CK6 Stock ROM | MT6768 Firmware Flash Guide
⚠️ DISCLAIMER: This guide is for educational purposes only. We don't provide direct firmware downloads. Always obtain official CK6 firmware from Tecno Mobile authorized sources.
🔍 CK6 Firmware Specifications
Device Model
Tecno Camon 20 (CK6)
Tecno Camon 20 (CK6)
Chipset
MediaTek Helio G85 (MT6768)
MediaTek Helio G85 (MT6768)
Android Version
Android 13
Android 13
📋 Pre-Flash Checklist
- ✅ Confirm CK6 model (Settings → About Phone)
- ✅ 60%+ battery (critical for Helio G85)
- ✅ SP Flash Tool v5.2208+
- ✅ MediaTek USB Drivers
- ✅ Original USB cable
- ✅ Backup camera settings (especially for Camon series)
⚡ Step-by-Step Flashing Guide
1. Extract Files:
Unzip firmware package → Locate scatter file (
Unzip firmware package → Locate scatter file (
MT6768_Android_scatter.txt)
2. Configure SP Flash Tool:
Load scatter file → Select "Download Only" mode
Load scatter file → Select "Download Only" mode
3. Connect Device:
Power off → Hold Volume Down → Connect USB cable
Power off → Hold Volume Down → Connect USB cable
4. Start Flashing:
Click "Download" → Wait 20-30 minutes (do not disconnect)
Click "Download" → Wait 20-30 minutes (do not disconnect)
5. First Boot:
Disconnect → Power on → Initial setup takes 5-10 minutes
Disconnect → Power on → Initial setup takes 5-10 minutes
🔧 Camera-Specific Fixes
| Camera Issue | Solution |
|---|---|
| Blurry photos | Flash camera calibration files |
| Camera app crash | Replace camera.apk |
| Focus issues | Recalibrate sensor |
| Low-light problems | Update AI camera module |
✅ Post-Flash Verification
- 📸 Test all camera modes (48MP, Night, Portrait)
- 🔍 Check IMEI (*#06#)
- 📶 Verify network connectivity
- 🔋 Monitor battery performance
📢 LEGAL: Tecno Camon 20 firmware is proprietary. Camera calibration files are protected intellectual property.
Download the necessary tools and drivers:
MTK USB Drivers SP Flash Tool (with Auth Bypass) DA Auth File SP Flash Tool V5 1824