Tecno Camon 20 Pro CK6n Firmware Flash File | Stock ROM for Dead After Root

Mr Mobile
0

šŸŽÆ Professional Solution For: 50MP mode crashes | RGBW night mode noise | 4K stabilization failure | AI skin tone errors | Pro color calibration

✨ Camera-Specific Benefits

šŸ“· Sony IMX890 Fix

Resolves "Camera failed" in 50MP full-res mode

šŸŒ™ RGBW Night Boost

Reduces chroma noise in low-light (f/1.88)

šŸŽ„ 4K EIS Lock

Stabilizes shaky footage (Cameron 2.0 algorithm)

⚠️ Critical Photography Fixes

  • 50MP Crash: "Cannot switch to high-res" error
  • Skin Tone Errors: AI over-smoothing faces
  • Color Shift: White balance inconstancy
  • Night Mode Grain: Excessive noise at ISO 3200+
  • EIS Failure: Unstable 4K@30fps video

šŸ” Pre-Flash Essentials

  1. Use SP Flash Tool v5.2214+ (Dimensity 8050 optimized)
  2. Backup camalgo partition for AI tuning data
  3. Disable HDR Enhanced mode temporarily

šŸ“˜ Advanced Flashing Guide

Professional imaging calibration method:
Dimensity Flashing Protocol

⚙️ Imaging Hardware

  • Chipset: MediaTek Dimensity 8050 (6nm)
  • Main Sensor: Sony IMX890 (1/1.56")
  • Key Partitions: camalgo, isp_tuning, eis_config

šŸ’Ž Pro Tools

  • Manual Color Calibration Guide
  • RGBW Noise Reduction Script
  • Cinematic 4K LUTs Pack
Tecno Camon 20 Pro CK6n test point isppinout
Tecno Camon 20 Pro CK6n Test Point (Fix Brom) [Repair Original IMEI] [Dead Boot Repair]
Tecno Camon 20 Pro CK6n Test Point (Fix Brom) for Repair Original IMEI Dead Boot Repair Flash Without Cridet Tecno Camon 20 Pro CK6n isp pinout Tecno Camon 20 Pro CK6n test point for brom mode

Post a Comment

0 Comments

Please Select Embedded Mode To show the Comment System.*

#buttons=(Ok, Go it!) #days=(20)

Our website uses cookies to enhance your experience. Check Now
Ok, Go it!