Tecno Spark Go KC1 Magisk Root Unlock Bootlouder ( How To Root KC1 ) Without Twrp Recovery

Do you want to root your Tecno Spark Go KC1 without paying anything? If yes, you're in the right place. This guide provides a safe and step-by-step method to unlock the bootloader, patch the boot image with Magisk, and root your Tecno Spark Go KC1 using only free tools. All files and downloads are available below.

This is a beginner-friendly method, but please be careful. Even a small mistake during flashing can cause your phone to stop working or enter a bootloop. Make sure to follow all steps correctly.

📁 Required Files to Root Tecno Spark Go KC1

• Magisk Patched boot.img
• Original vbmeta.img for verification bypass
• Magisk Manager APK
• ADB and Fastboot tool for Windows

📌 Before You Begin: Always confirm your exact build version (e.g. KC1-H6114A-P-190731V165) and download files that match it. Charge the phone above 60% to avoid interruptions, and back up all important data.

⚠️ Warning:
This process will erase all data from your Tecno Spark Go KC1. Also, using the wrong firmware files may cause your phone to go dead. Make a full backup before proceeding.

🔧 How to Root Tecno Spark Go KC1 Using Magisk

1. Install ADB and Fastboot USB drivers on your PC. (Link below)
2. Extract the downloaded root files and tools using WinRAR or 7Zip.
3. On your Tecno phone, go to Settings > About Phone and tap Build Number 7 times to activate Developer Options.
4. Now go to Settings > Developer Options and enable OEM Unlock and USB Debugging.
5. Copy the original boot.img and Magisk APK to your phone.
6. Install the Magisk app and patch the boot.img using it.
7. Move the patched boot image back to your PC’s ADB Fastboot folder. Also copy the vbmeta.img file to the same folder.
8. Turn off your Tecno Spark Go KC1 and boot into Fastboot Mode by holding Volume Up + Power buttons together.
9. Connect the phone to your computer using a USB cable.

💻 ADB & Fastboot Commands to Enter:

fastboot flashing unlock
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
fastboot flash boot boot.img
fastboot reboot

Once your phone reboots, open the Magisk app and verify that root access has been granted. If everything is done correctly, your Tecno Spark Go KC1 will be successfully rooted.

⬇️ Download Tecno Spark Go KC1 Root Files

Official Magisk Root Setup – Tecno KC1

Download Patched Boot File – KC1-H6114A-P-190731V165

Download ADB & Fastboot Drivers

If you made any mistake or your phone is stuck after rooting, visit our website again and search for your model. We have flashing methods for Tecno KC1 and many other phones.