If your Lava R3 Note touchscreen has stopped working after flashing, you're in the right place. This post provides the official Lava R3 Note stock ROM (scatter format) and a complete SP Flash Tool guide to restore full device functionality. The firmware also helps fix software-related issues like dead boot, boot logo hang, and DM-verity errors.
⚙️ Common Issues Resolved With This Firmware
- Touch not working after flashing
- Black screen after software update
- Bootloop or stuck on Lava logo
- dm-verity verification failed
- Stuck on Fastboot mode or Fastboot only
š Lava R3 Note Firmware Overview
| Component | Details |
|---|---|
| Model | Lava R3 Note |
| Chipset | MediaTek (MTK) |
| ROM Type | Scatter Flash File |
| File Name | Lava-R3-Note-23.zip |
| File Size | ~1.5 GB |
š¦ Download Lava R3 Note Firmware & Required Tools
⚠️ Read Before You Flash
Warning: Flashing this firmware will erase all user data. Make sure to back up your Lava R3 Note. Also ensure your phone is at least 50% charged and the flash file matches your exact model and variant to avoid touchscreen or boot issues.
š§ How to Flash Lava R3 Note Using SP Flash Tool
- Install MTK USB Drivers on your Windows PC.
- Extract the Lava R3 Note firmware zip file using WinRAR or 7-Zip.
- Open SP Flash Tool and run it as Administrator.
- Click “Scatter-loading” and select the
MTxxxx_Android_scatter.txtfile. - Load the DA/Auth files if required (only for secure boot devices).
- Click the Download button in the tool.
- Power off the phone and connect it via USB cable.
- Flashing will begin automatically and complete within 5–8 minutes.
- Once done, reboot the phone and check touchscreen functionality.
š§Ŗ Still No Touch After Flash?
- Reflash with “Format All + Download” (backup NVRAM first)
- Ensure correct scatter file and touch firmware are used
- Use a DA Auth file if your phone uses secure boot