If your FIGI Note 1 Lite is stuck on logo, not turning on, or facing serious performance issues, flashing the official firmware might bring it back to life. This flash file is designed to fix dead boot repair problems, FRP bypass cases, and issues like after flash touch not work or FIGI Note 1 Lite completely dead. It's the official Stock ROM for FIGI Note 1 Lite and suitable for resolving various firmware flashing errors.
Users often face problems such as dm verity error, orange state error, red state error, system mount failed, or cache and userdata mount failed — all these can be resolved with a clean FIGI Note 1 Lite firmware installation. Additionally, if your FIGI Note 1 Lite shows "no service," or you're dealing with IMEI repair or network issues, flashing the right ROM version can fix those as well.
Steps to Flash FIGI Note 1 Lite:
- Install USB drivers for FIGI Note 1 Lite on your computer.
- Extract the firmware package completely.
- Launch the MTK Flash Tool.
- Load the .pac or scatter file into the flash tool.
- Power off your FIGI Note 1 Lite and press Volume Down.
- Connect it to your PC via USB cable to begin flashing.
If flashing gets stuck, doesn’t start, or your phone hangs after flashing — recheck your firmware version and use the correct build. Always follow the flashing method carefully to avoid issues like slow problem, keypad not work, camera not working, or power key malfunction.