Huawei ATH-UL01 Firmware Flash File to Reset and Flash Without Boot Issues

MR MOBILE
0

šŸ“„ Huawei ATH-UL01 Stock ROM (Firmware Flash File) – Software Repair Guide

Is your Huawei ATH-UL01 stuck on fastboot mode, showing a black screen, or not responding to touch after flashing? Don’t worry! Download the official stock firmware for Huawei ATH-UL01 and restore your device to its original condition. This flash file helps resolve software bugs, boot issues, dm-verity verification errors, and operating system glitches.

šŸ›  What This Firmware Fixes

  • Black screen after flashing
  • Touch not working after update
  • Stuck in fastboot mode
  • Dead boot or no power issue
  • dm-verity verification failed error

šŸ“¦ File Details

Model:Huawei ATH-UL01 (ShotX)
Chipset:Qualcomm
Firmware Version:C185B320 | Android 6.0.1 | EMUI 4.0.3
Flash Tool:UMT QCfire (Qualcomm)
Download File:Download Firmware
USB Drivers:Qualcomm USB Drivers

⚠️ Precautions Before Flashing

  • Charge your phone battery to at least 50%
  • Always match the firmware with the exact build version of your device
  • Backup all important data before proceeding

šŸ”§ Flashing Instructions Using UMT QCfire

  1. Install Qualcomm USB drivers on your PC
  2. Extract the firmware ZIP using WinRAR or 7Zip
  3. Launch the UMT QCfire tool
  4. Short the test point of Huawei ATH-UL01 and connect USB cable
  5. Load the XML firmware files in the flash tool
  6. Click the Flash button to begin installation

šŸ“ø ATH-UL01 Test Point (Pinout)

Huawei ATH-UL01 Test Point

Huawei ATH-UL01 Test Point for EDL Mode

šŸ“Œ Final Notes

If your Huawei ShotX ATH-UL01 still doesn’t respond after flashing, make sure the firmware build version is correct. For further help, check our YouTube videos or contact us through comments.

Post a Comment

0 Comments

Please Select Embedded Mode To show the Comment System.*

#buttons=(Ok, Go it!) #days=(20)

Our website uses cookies to enhance your experience. Check Now
Ok, Go it!