Vivo Y81 PD1732F Firmware (Flash File + Flashing Guide)
Is your Vivo Y81 PD1732F stuck on Fastboot mode, showing a black screen, or refusing to boot up after a failed update? You’ve landed in the right place. In this post, we’ve provided the complete Vivo Y81 PD1732F stock ROM firmware package, including tools and a detailed guide to safely flash your phone and restore it to its original condition.
Problems You Can Solve with This Flash File
- Device stuck on logo or bootloop
- Touch not responding after flashing
- Black screen or display issues
- Dead boot (no power, no vibration)
- dm-verity verification failed error
- Stuck in Fastboot mode or recovery loop
⚙️ What You Need Before You Flash
Please ensure you’re using the exact firmware build for your Vivo Y81 PD1732F. Mismatched builds can cause hardware issues. Also, charge your phone to at least 70% to avoid interruptions during flashing.
š§ Required Downloads:
- PD1732F_EX_A_2.70.8 Firmware File
- SD Card OTA Update Package
- SP Flash Tool (Modified)
- MTK USB Drivers
š ️ Flashing Instructions for Vivo Y81 PD1732F
- Download all required files and extract them using 7Zip or WinRAR.
- Install the MTK USB Drivers on your PC.
- Open the MCT Bypass Tool and click the Bypass button.
- Turn off the phone. Press and hold both Volume Up and Volume Down buttons, then connect it to the PC.
- The device will be detected in Device Manager as an MTK COM port.
- Open SP Flash Tool, go to the Connection tab, select UART, and choose the correct COM port.
- Set Baud Rate to 921600.
- Load the
DA Filein the Download Agent section. - Click on Scatter-loading and select the
MT65XX_Android_Scatter.txtfile from the firmware folder. - Click the green Download button and wait for the flashing to complete.
⚠️ Important Note:
Flashing will erase all your personal data from the phone. Always create a full backup before proceeding.
š Firmware Info Table
| Model | Vivo Y81 PD1732F |
|---|---|
| Firmware Build | PD1732F_EX_A_2.70.8 |
| Flash File Type | MTK Scatter File |
| Tool Required | SP Flash Tool |
| Driver | MediaTek VCOM USB Drivers |
❓ Frequently Asked Questions (FAQs)
- Q1: My phone is not turning on after flashing. What should I do?
- Make sure the DA file and scatter file are correct. Also try flashing again using Format All + Download mode in SP Flash Tool.
- Q2: Can I flash this firmware via SD card?
- Yes, use the OTA update package from Vivo’s official site (linked above) for SD card flashing.
- Q3: Touch screen not working after flash?
- This usually happens when the firmware build does not match the device variant. Double-check the build version.
- Q4: Is the firmware file password-protected?
- No. All files provided are clean and free of passwords or encryption.
- Q5: Will this remove FRP (Google account lock)?
- No, this firmware does not bypass FRP. You’ll need a separate FRP removal tool or authorized service method.
Still Need Help?
Let us know your issue in the comments or explore more firmware downloads at Firmware4Mobile.com.