Vivo Y70S PD2002 Flash File Firmware Stock ROM for Fixing Dead Boot and Logo Stuck Issues

MR MOBILE
0

Vivo Y70S Flash File (PD2002_A_1.7.23) - Official Stock ROM & Flashing Guide

Is your Vivo Y70S bricked, stuck on boot logo, or showing a black screen after an update? You can resolve these problems by flashing the original stock firmware (ROM) using the Qualcomm QFIL tool. Below, you’ll find the tested Vivo Y70S flash file, drivers, and flashing instructions to safely restore your phone’s system software.

✔ What Issues This Firmware Fixes:

  • Fastboot mode stuck or recovery loop
  • dm-verity verification failed error
  • Boot loop or auto restart issue
  • Touchscreen not working after flash
  • Dead boot (phone not turning on)
⚠️ Pre-Flash Checklist:
• Backup your data; this process wipes all content.
• Make sure your Vivo Y70S has at least 60% battery.
• Use the exact firmware version matching your build.
• Install Qualcomm drivers on your PC before proceeding.
Flashing Vivo Y70S QFIL Tool

Firmware Details - Vivo Y70S

Stock ROM Specifications
ModelVivo Y70S (PD2002)
ChipsetQualcomm Snapdragon
Build VersionA_1.7.23
Flash ToolQPST/QFIL
File FormatMBN + XML (zip)

šŸŽÆ Download Section

Official Firmware & Tools
šŸ“¦ Vivo Y70S Firmware – PD2002_A_1.7.23
🧰 QFIL Flash Tool (QPST Suite)
🧩 Qualcomm USB Drivers

šŸ› ️ How to Flash Vivo Y70S Firmware with QFIL

  1. Install Qualcomm USB drivers on your computer.
  2. Extract the downloaded firmware using WinRAR or 7-Zip.
  3. Open the QFIL tool and choose Flat Build.
  4. Click Browse and select the prog_emmc_firehose_*.mbn file.
  5. Click Load XML and first choose rawprogram.xml, then patch.xml.
  6. Power off your Vivo Y70S and boot it into EDL Mode using test point (if needed).
  7. Once the device is detected on PC, click Download in QFIL.
  8. Wait for the process to complete. The phone will reboot automatically.

šŸ’” Flashing Tips & Troubleshooting

  • If QFIL shows "Download Fail", try reinstalling drivers or switching USB ports.
  • For EDL mode, short the test points or use an EDL cable.
  • After flashing, if stuck on logo, enter recovery and perform a factory reset.

Need Help? Drop your issue in the comment section on firmware4mobile.com and we’ll respond with a tested solution.


Disclaimer: Flashing is a technical process. Proceed carefully and at your own risk. We are not responsible for any damage to your device.

Post a Comment

0 Comments

Please Select Embedded Mode To show the Comment System.*

#buttons=(Ok, Go it!) #days=(20)

Our website uses cookies to enhance your experience. Check Now
Ok, Go it!