Vivo Y19 Firmware Flash File [PD1934F] | Stock ROM Repair & Boot Fix
If your Vivo Y19 PD1934F is not turning on, stuck on the Vivo logo, or showing a black screen after flash, then flashing the official stock firmware can restore your phone. This tutorial guides you step-by-step through flashing with the updated SP Flash Tool and the MCT Bypass tool.
š² Vivo Y19 Firmware Features
- Fix black screen or fastboot stuck issues
- Restore original stock ROM and remove malware
- Recover dead boot problems (DA AUTH Supported)
- Solution for touch not working after flashing
- Resolve dm-verity and boot loop errors
š Required Files & Tools
Before flashing, please download and extract the following resources:
⚠️ Important: Make sure the battery is charged above 50%. Flashing will erase all data. Take a complete backup before you proceed.
š§° Flashing Steps for Vivo Y19 PD1934F (MTK)
- Install MTK USB Drivers on your computer
- Extract the downloaded firmware and tools using WinRAR or 7zip
- Launch the MCT Bypass Tool and click the "Bypass" button
- Power off your phone and press both Volume Up + Down simultaneously
- Connect your phone to the PC using a USB cable
- MCT Tool will detect your phone; MTK port appears in Device Manager
- Now open the SP Flash Tool
- Set connection to UART and choose correct COM Port
- Set Baud Rate to 921600
- Load
DA_SWSEC.binin Download Agent field - In the Scatter Loading section, choose
MT6768_Android_scatter.txtfrom firmware folder - Click on the green Download button
- Flashing will begin, wait until you see the success message
Do not disconnect your device during flashing!
š Firmware & Flash Tool Downloads
| File Name | Download |
|---|---|
| PD1934F_EX_A_8.71.20 Firmware (Y19) | Download |
| SP Flash Tool (Modified) | Download |
| MTK USB Drivers | Download |
š§Ŗ Vivo Y19 Test Point Image
