Vivo Y11 PD1224T MT6577 Flash File Firmware Rom - | Fix No Command Error in Recovery Mode

MR MOBILE
0

If your Vivo PD1224T (Y11 MT6577) smartphone is stuck on the logo, not booting, or experiencing a software crash, you can easily fix it by flashing the correct stock ROM. This guide provides the tested Vivo PD1224T firmware flash file along with a flashing method using SP Flash Tool.

🧩 Common Issues Fixed by Flashing Firmware

  • Bootloop or stuck on Fastboot mode
  • Dead boot software issue (won't power on)
  • Touchscreen not working after flashing
  • dm-verity verification failed error
  • Lag, crash, or frequent restarts

⚠️ Important Instructions Before Flashing

✔ Ensure you download the firmware for the correct model and build version (PD1224T).
✔ Charge your device to at least 50% before starting the flashing process.
✔ Always backup important data, as flashing will erase everything from the phone.

šŸ”§ Tools You Will Need

šŸ“± Flashing Guide for Vivo PD1224T

  1. Extract the downloaded firmware using WinRAR or 7-Zip.
  2. Install the MediaTek USB Drivers on your PC.
  3. Open SP Flash Tool and load the scatter file from the extracted firmware folder.
  4. In the Download Agent section, select the DA file (if applicable).
  5. Power off your phone and press Volume Down.
  6. While holding the volume key, connect the phone to the PC using a USB cable.
  7. Click on the Download button in SP Flash Tool to begin flashing.
  8. Wait until you see the success message confirming the process is complete.

šŸ“‚ Vivo PD1224T Flash File Download

FileDownload Link
Vivo PD1224T Firmware [MT6577] Download
SP Flash Tool (MTK) Download
MTK USB Drivers Download

šŸ’¬ FAQs – Vivo Y11 PD1224T Firmware

  • Q: What chipset is used in Vivo PD1224T?
    A: It uses the MediaTek MT6577 processor.
  • Q: Can this firmware fix a dead phone?
    A: Yes, if it’s due to software issues like corrupt OS or bootloader.
  • Q: Is the firmware password protected?
    A: No, the file is password-free and ready to flash.

Post a Comment

0 Comments

Please Select Embedded Mode To show the Comment System.*

#buttons=(Ok, Go it!) #days=(20)

Our website uses cookies to enhance your experience. Check Now
Ok, Go it!