✅ Flash File Firmware Vivo PD1302L – QFIL Flash Tool | Dead Boot & Touch Fix
Download the tested Vivo PD1302L firmware flash file to fix issues like bootloop, black screen after update, touch not working, or dm-verity verification failed. This official Vivo PD1302L Stock ROM is to be flashed using Qualcomm QFIL Tool to restore the device’s original software.
🛠 Vivo PD1302L Software Problems That This Firmware Solves
- Fix Vivo PD1302L stuck on fastboot mode
- Repair touch not working after flashing
- Black screen after boot logo
- Dead boot or no power
- OS corruption or dm-verity error
⚠️ Important Notes Before Flashing
✔️ Ensure you are using the correct firmware version for your specific PD1302L build.
🔋 Charge your battery to at least 60% before beginning.
💾 Backup important files — flashing will erase all user data.
📥 Vivo PD1302L Firmware & Tools Download
| File Description | Download Link |
|---|---|
| 📁 Official Firmware – PD1302L (QFIL Package) | Download Firmware |
| 🧰 QPST/QFIL Flash Tool (v2.7.480) | Download QFIL Tool |
| 🔌 Qualcomm USB Drivers for Flashing | Download Drivers |
📲 Flashing Vivo PD1302L Using QFIL – Step-by-Step Guide
- Install Qualcomm USB Drivers on your PC.
- Extract the firmware zip using WinRAR or 7-Zip.
- Open QFIL Tool from the QPST package.
- Select
Flat Buildmode. - Click on Browse and choose
prog_emmc_firehose_*.mbnfrom the firmware folder. - Click Load XML and select both
rawprogram.xmlandpatch.xml. - Put the phone in EDL Mode (use test point if needed).
- Once Qualcomm port is detected, click Download in QFIL.
- Wait for the flashing process to complete. The phone will auto-reboot.
🧠 Tips If Flashing Fails
- If QFIL doesn't detect the phone, reinstall drivers or try another USB cable.
- Double check you selected the correct .mbn and XML files.
- If stuck at logo after flash, try factory reset from recovery.