Download the official Vivo PD1302F firmware flash file to fix common software problems like bootloop, black screen, dead boot, or touch not working after a failed update. This is the official stock ROM for the Vivo PD1302F Qualcomm variant, to be flashed using the trusted QPST/QFIL Flash Tool.
📱 Vivo PD1302F Common Problems Fixed
- Stuck on logo / fastboot mode
- DM-Verity verification failed
- Touch not working after flash
- Vivo PD1302F no power or dead boot
- Firmware OS corruption
- Blank display or no boot after flashing
⚠️ Precautions Before Flashing Vivo PD1302F
📌 Ensure the downloaded firmware matches the exact model and build version.
🔋 Charge your Vivo PD1302F to at least 60% battery.
💾 Back up all personal data before flashing – it will be erased.
📥 Download Vivo PD1302F Firmware, Tool & Drivers
| File Description | Download Link |
|---|---|
| 📦 Firmware: PD1302F_EX_B_4.0.12 (Official Stock ROM) | Download Firmware |
| 🧰 QFIL Tool (QPST v2.7.480 Package) | Download Tool |
| 🔌 Qualcomm USB Drivers for Flashing | Download Drivers |
🛠️ Step-by-Step Flashing Guide – Vivo PD1302F
- Install the Qualcomm USB Drivers on your computer.
- Extract the downloaded firmware using 7Zip or WinRAR.
- Launch the QFIL tool from the QPST folder.
- Select
Flat Buildmode from the top menu. - Click on Browse and select the
prog_emmc_firehose_*.mbnfile from the firmware folder. - Click on Load XML and select both
rawprogram.xmlandpatch.xmlfrom the same folder. - Put your Vivo PD1302F into EDL (Emergency Download) mode. Use Test Point method if necessary.
- Once detected in Device Manager as Qualcomm HS-USB QDLoader, click Download in QFIL.
- Flashing will begin automatically. Wait until the success message appears.
- Your device will reboot. First boot may take a few minutes.
🧠 Troubleshooting Tips
- EDL not detected? Try different USB cable or port, or reinstall drivers.
- Stuck at 0%? Double-check that both XML files are properly loaded.
- Post-flash black screen? Try flashing again with battery disconnected.