Vivo Y1S PD2014F MT6765 Firmware Flash File | | Flash Tool Compatible Firmware ROM

MR MOBILE
3

Download official Vivo Y1S PD2014F firmware to fix software issues like black screen after flash, touch not working, dm verity failed, or fastboot stuck error. This MTK-based scatter firmware works perfectly with the SP Flash Tool and includes all necessary files like scatter.txt, DA file, and boot image.

🧰 Issues You Can Fix with This Firmware

  • Fix Vivo Y1S stuck on logo or fastboot mode
  • Repair Vivo Y1S black screen after flashing
  • Touch not working after firmware install
  • Dead boot or device not turning on
  • dm verity verification failed & system crash
Vivo Y1S PD2014F MT6765 Firmware Flash File | | Flash Tool Compatible Firmware ROM

⚠️ Important Flashing Instructions

✔️ Always confirm the firmware version matches your PD2014F build.
🔋 Charge your phone to at least 60% before flashing.
💾 Take a backup of all important data — flashing will erase everything.

📥 Download Vivo Y1S Firmware, Tools & Drivers

DescriptionLink
📁 Vivo Y1S PD2014F Scatter Firmware (Official) Download Firmware
🧰 Modified SP Flash Tool for Secure Boot (By Kurdish) Download Tool
🔌 MediaTek USB Drivers (For MTK Flashing) Download Drivers

🔧 How to Flash Vivo Y1S Using SP Flash Tool (DA Auth Bypass Method)

  1. Install the MediaTek USB Drivers on your computer.
  2. Extract the firmware zip file and the SP Flash Tool using 7-Zip or WinRAR.
  3. Run MCT Bypass Tool and click "Bypass" to disable authentication.
  4. Switch off the Vivo Y1S and connect it while holding both volume keys.
  5. Once connected, a MediaTek port (COMx) will appear in Device Manager.
  6. Open SP Flash Tool and go to the "Connection" tab.
  7. Select "UART" and choose the correct COM port.
  8. Set Baud Rate to 921600.
  9. Load the DA file in the “Download Agent” section.
  10. Select MT65XX_Android_Scatter.txt in the Scatter-loading section.
  11. Click the green "Download" button to begin flashing.

💡 If you face any error like BROM error, authentication failure, or stuck at red bar — recheck drivers, DA file, and make sure you’re using the correct scatter firmware for PD2014F.

📷 Vivo Y1S Test Point Image

إرسال تعليق

3 تعليقات

Please Select Embedded Mode To show the Comment System.*

#buttons=(Ok, Go it!) #days=(20)

Our website uses cookies to enhance your experience. Check Now
Ok, Go it!