Vivo Xplay 6 PD1610 Firmware Flash File | Qualcomm Firmware to Fix FRP + Reboot Loop

✅ Flash File Firmware Vivo PD1610 – Stock ROM, QFIL Tool & Dead Boot Fix

Download the official Vivo PD1610 firmware flash file (Stock ROM) to fix various software issues such as dead boot, stuck on logo, fastboot mode errors, and black screen. This guide explains step-by-step how to flash Vivo PD1610 using Qualcomm QFIL Tool safely.

🛠️ Common Vivo PD1610 Problems Fixed by Flash File:

• Vivo PD1610 Stuck on Logo or Bootloop
• Touch Not Working After Flash
• dm-verity Verification Failed
• Fastboot Mode or No Command
• Vivo PD1610 Black Screen After Flash
• Dead Boot or No Power Issue

⚠️ Flashing Precautions (Read Carefully)

✔ Make sure to use the correct firmware for the exact build version of your Vivo PD1610.
🔋 Charge your device at least 50% before flashing.
💾 Back up your data – flashing will wipe everything.

📥 Download Vivo PD1610 Flash File, QFIL Tool & Drivers

File Name	Download
📁 PD1610_D_1.17.5_10012017 (Firmware)	Download ROM
🧰 QPST Flash Tool (QFIL)	Download Tool
🔌 Qualcomm USB Drivers	Download Drivers

🔧 How to Flash Vivo PD1610 Firmware (Using QFIL)

1. Download and extract the Vivo PD1610 firmware ZIP using WinRAR or 7Zip.
2. Install Qualcomm USB Drivers on your computer.
3. Launch the QPST Flash Tool and open QFIL.
4. Set Build Type to Flat Build.
5. Click Browse under Programmer Path and select prog_emmc_firehose_*.mbn from the extracted ROM.
6. Click Load XML and select rawprogram.xml, then patch.xml.
7. Put the phone in EDL Mode (use Test Point if necessary).
8. Connect the phone via USB — a Qualcomm port should show in Device Manager.
9. Click Download to begin flashing.
10. Wait until you see the success message — the phone will reboot.

📌 Flashing Notes & Help

• Wrong build flashing can brick the phone — always match firmware version.
• In case of errors or issues, retry using another USB port or cable.
• Leave a comment on Firmware4Mobile if you face problems.