Vivo X1ST Flash File MT6589 | Dead Boot Fix | DA Auth | Scatter Firmware Solution
Download tested and official Vivo X1ST flash file MT6589 to repair software issues like black screen after flash, touch not working, stuck on logo, fastboot mode, and dm-verity verification failed. This firmware includes a scatter file and DA auth support, and works perfectly with SP Flash Tool.
š§ Problems Solved with Vivo X1ST Firmware
- Dead Boot (Phone not turning on)
- Touch Screen Not Responding After Flash
- Fastboot Mode / Logo Stuck Fix
- dm-verity Verification Failed Issue
- System Crash or Lagging Performance
š Firmware Package Includes:
- MT6589_Android_Scatter.txt
- Preloader.bin
- DA Auth File
- Recovery.img
- Boot.img
- System.img
⚙️ Flashing Requirements
Important Note: Charge your Vivo X1ST to at least 60% before flashing. Make sure to use the correct build version to avoid hard brick. Backup all your important data before starting the flash process.
š” How to Flash Vivo X1ST Using SP Flash Tool
- Install MTK USB Drivers on your PC (link below).
- Extract the SP Flash Tool and firmware using WinRAR or 7Zip.
- Launch SP Flash Tool on your computer.
- Load the DA file and select the scatter file from the firmware folder.
- Click the green Download button.
- Switch off the phone, then press and hold the Volume Down button.
- Connect the device to your PC using a USB data cable.
- Flashing will begin automatically and complete in a few minutes.
Once the flashing process is complete, disconnect the device and reboot it. The phone should now be restored with factory firmware.
⚠️ Caution
Never flash firmware that does not match the exact model and CPU version. Incorrect flashing may lead to permanent damage (dead boot or no display).
⬇️ Download Vivo X1ST Firmware + Tools
| X1ST MT6589 Flash File Firmware (Scatter + DA) |
| SP Flash Tool
Tags
Share to other apps
Copy
Post Link
|