Vivo V5S PD1612DF MT6750 Flash File Firmware Rom - | Fix Android Logo Freeze During Boot

MR MOBILE
0

Download the official Vivo V5S (PD1612DF) Firmware Flash File to fix software issues like touch not working after flashing, dead boot, black screen, or stuck on logo. This tested scatter format MTK firmware includes DA/Auth file and is compatible with the SP Flash Tool for easy restoration.

Touch Not Responding After Flash?

Many users face touch problems after using the wrong firmware or skipping the DA/Auth file. The touchscreen driver may be corrupted or not loaded properly if the firmware isn’t model-specific. Using the correct flash file provided below will restore touch response.

✔️ Common Problems Fixed:

  • Touch not working after flash
  • Dead boot or no display
  • Hang on logo or bootloop
  • dm-verity verification failed
  • FRP and software locks
Vivo V5S PD1612DF Firmware File Information
Device:Vivo V5S (PD1612DF)
Chipset:MediaTek MT6750
Firmware Type:Scatter File + DA/Auth + Boot/Recovery
Flashing Tool:SP Flash Tool

Warning Before Flashing

Note: Flashing will erase all data from your device. Please back up contacts, photos, and apps before proceeding. Only flash firmware that matches the exact build version of your phone.

How to Flash Vivo V5S Using SP Flash Tool

  1. Download and install MediaTek USB Drivers.
  2. Extract the firmware and SP Flash Tool using WinRAR or 7-Zip.
  3. Open the SP Flash Tool and load the MT6750_Android_scatter.txt from the firmware folder.
  4. Go to “Download” tab and make sure DA file is selected if required.
  5. Click “Download”.
  6. Power off your Vivo V5S and connect it to PC while holding the volume down key.
  7. Flashing will begin automatically. Wait until the success popup appears.

šŸ’” Touch Not Working Fix Tip

If the touchscreen still doesn’t work after flashing, try flashing only the preloader.bin and boot.img files using the same tool and DA/Auth file.

Download Vivo V5S Flash File & Tools

Firmware & Flash Tool Download Links
Vivo V5S Firmware (PD1612DF_EX_A_3.16.2)
SP Flash Tool
MediaTek USB Drivers

Troubleshooting

  • Flashing stuck? Use another USB cable or port.
  • Still no touch? Reflash with different DA file or newer firmware version.
  • Phone not detected? Reinstall USB drivers and try again in download mode.

If you have any questions or face issues during flashing, feel free to leave a comment or visit firmware4mobile.com for help and more firmware files.

Post a Comment

0 Comments

Please Select Embedded Mode To show the Comment System.*

#buttons=(Ok, Go it!) #days=(20)

Our website uses cookies to enhance your experience. Check Now
Ok, Go it!