Vivo S6T MT6575 Firmware Flash File Rom | Full Software Recovery for MTK Devices

MR MOBILE
0

Flash File Firmware Vivo S6T | Fix Touch Not Working Issue After Flash

After flashing your Vivo S6T, is the touch screen unresponsive or completely dead? You're not alone—this issue usually occurs when an incompatible or incomplete firmware is flashed. On this page, you'll get the tested Vivo S6T MT6575 scatter firmware and the correct flashing method to solve touch not working after flash issue using the SP Flash Tool and DA/Auth files.

Common Reasons for Touch Not Working After Flash:

  • Incorrect firmware version flashed
  • Corrupted or missing preloader.bin or lk.bin files
  • Touch panel driver mismatch
  • Partial format or firmware skip during flashing

✅ Required Tools and Files

⚠️ Important Note Before Flashing

Attention: Always verify the firmware version with the phone's model and build number. Flashing the wrong firmware can cause more damage like black screen or dead boot. Fully charge the battery (at least 50%) before proceeding.

How to Fix Vivo S6T Touch Issue Using SP Flash Tool

  1. Install MediaTek USB Drivers on your PC.
  2. Extract the firmware and tool with 7-Zip or WinRAR.
  3. Run SP Flash Tool as Administrator.
  4. Click on “Scatter-loading” and load MT6575_Android_scatter.txt from the firmware folder.
  5. Ensure all partitions including preloader, lk, boot, and system are checked.
  6. Click on “Download Only” (not Format All + Download).
  7. Power off the Vivo S6T, press Volume Down, and connect it via USB.
  8. The flashing will start automatically. Wait until you see the green success tick.

✔️ Issue Resolved

This firmware package includes the correct touchscreen drivers for the Vivo S6T. After flashing, your touch panel will function properly, and all system errors will be fixed.

Firmware & Flash Tool Details

Download LinkType
Vivo_S6T_MT6575_Firmware Scatter ROM (with Touch Fix)
SP Flash Tool Flash Tool
MTK USB Drivers USB Driver

Having Trouble?

If you're facing errors like “BROM ERROR: S_FT_ENABLE_DRAM_FAIL” or the phone doesn't respond, double-check DA/Auth compatibility. For personalized help, comment on your issue or visit Firmware4Mobile.com.

Post a Comment

0 Comments

Please Select Embedded Mode To show the Comment System.*

#buttons=(Ok, Go it!) #days=(20)

Our website uses cookies to enhance your experience. Check Now
Ok, Go it!