If your Vivo Nex Dual gets stuck on the boot logo after flashing the stock firmware, don’t panic. This issue typically indicates a problem with partition loading or an incompatible firmware version. In this guide, we’ll show you how to fix bootloop issues and successfully revive your phone.
Why Vivo Nex Dual Hangs on Logo After Flash?
- Incorrect or incomplete flashing procedure
- Using wrong build or regional firmware
- Corrupt
userdata
orsystem.img
partition - Missing
rawprogram.xml
orpatch.xml
during flash
What You Need to Fix the Bootloop
Step-by-Step Flashing Guide
- Install Qualcomm USB drivers on your PC.
- Extract the firmware ZIP file using WinRAR or 7-Zip.
- Launch QFIL tool and choose Flat Build option.
- Click “Browse” and load the
prog_emmc_firehose_*.mbn
file from the firmware folder. - Click “Load XML” and select both
rawprogram.xml
andpatch.xml
. - Power off your phone and connect it to PC in EDL mode (use test point method if needed).
- Click the Download button in QFIL to begin the flash.
Important Tip:
Always match the firmware build with your device’s region (e.g., EX/CN). Mismatched firmware can cause bootloop or baseband errors.
Additional Fix: Format All + Download
If the standard method doesn’t work and your device is still stuck on the logo, you can try the “Format All + Download” option in QFIL. However, this will erase all calibration data including IMEI and network settings. Backup QCN if possible.
Download Section
Files & Tools |
---|
Vivo Nex Dual Firmware (EX_A_6.12.7) |
QFIL Tool (QPST) |
Qualcomm USB Drivers |
Caution: Flashing firmware erases all user data. Make sure to backup your important data before starting.