š Searching for authentic stock ROM for your Tecno Pop 2 Pro B2? This complete guide provides the official MT6580 firmware with scatter file to resolve:
š Dead after OTA update
š FRP lock removal
š¶ No network signal
š Bootloop issues
⚠️ Critical Pre-Flash Checklist
- ✔️ Confirm model: B2 (not B1 or B3)
- ✔️ Battery ≥ 60% charge
- ✔️ Original USB cable
- ✔️ Windows 7/10 PC (32-bit recommended)
š„ Official MT6580 Firmware Details
| Component | Version |
|---|---|
| Android OS | 8.1 Oreo (Go Edition) |
| Build Number | B2-H811ABC-M-210715V48 |
| Scatter File | MT6580_Android_scatter.txt |
š§ Step-by-Step Flash Guide
- Download SP Flash Tool v5.2012 (Best for MT6580)
- Extract firmware using password "TECNOB2@2021"
- Load scatter file → Select "Download Only"
- Connect phone in BROM mode (Vol Down + Power)
- Start flashing (Wait for green checkmark)
⚖️ Legal Disclaimer: This official firmware is provided for repair purposes only. Tecno may void warranty for flashed devices. Never share your IMEI publicly.
š Emergency Solutions
- DRAM Failed? Try "Format All + Download" in SPFT
- Stuck at DA 100%? Use MTK Bypass Utility v1.8
- IMEI Lost? Contact Tecno Service Center
š Expert Recommendations
- Always verify file checksum before flashing
- For better performance, disable Go Edition bloatware
- Create full NVRAM backup after successful flash
Download the necessary tools and drivers:
MTK USB Drivers SP Flash Tool (with Auth Bypass) DA Auth File SP Flash Tool V5 1824