itel Prime 4 IT1704 Firmware
Need to reinstall the software on your itel Prime 4? This page provides the stock firmware package identified as iTel_Prime_4_It1704_V017_7.0, along with links to flashing utilities and USB drivers.
Stock ROM Details
Device: itel Prime 4
Model: IT1704
Firmware build: V017
Android version: 7.0
Download Firmware ZIPFlashing Tools and Drivers
For supported devices and compatible firmware formats.
Download Transsion SoftwareListed size: 11 MB
Get SPD DriversListed size: 21 MB
Get SPD Upgrade ToolHow to Flash itel Prime 4
- Download the firmware package and extract it using 7-Zip or WinRAR.
- Install the appropriate USB drivers on your computer.
- Open a flashing tool that supports the phone's chipset and the supplied firmware format.
- Load the firmware's PAC file if using a compatible SPD flashing tool.
- Click the tool's Start or Download button, following the instructions for that utility.
- Switch off the phone and connect it to the computer using a USB data cable. Hold the required volume key if the tool's instructions call for it.
- Wait for the flashing process to finish. Disconnect the phone only after the tool confirms completion.
Flashing stock firmware may erase personal files and settings. Back up important data first and verify that the firmware matches your exact device. Do not load a PAC file into a tool that does not support that format.
Compatibility note: The Transsion software and SPD tools listed above are for different supported platforms or formats; they are not necessarily interchangeable. Confirm the device's chipset and the correct flashing method before proceeding.
If a download link fails or you encounter a flashing error, leave a comment with the problem and the exact error message.