Vivo X5F PD1401F Firmware | Fast Flash File for Battery Drain Fix

MR MOBILE
0

Is your Vivo PD1401F stuck on the logo, showing dm-verity verification failed, or not powering on after flashing? Get the original Vivo PD1401F Firmware Flash File to restore your phone using QFIL Tool (Qualcomm Flash). This post provides tested Stock ROM, boot.img, vbmeta.img, and the correct flashing procedure for EDL mode.

šŸ› ️ Issues Solved with Vivo PD1401F Firmware

  • Touch not working after flashing
  • Dead boot repair via QFIL tool
  • Fastboot mode stuck or no OS
  • dm-verity verification failed fix
  • Hang on logo, black screen problems
  • OS crash, software not responding

šŸ“„ Firmware Download Links

File NameDownload
PD1401F_EX_A_1.14.22_QFIL Firmware Download
QPST Flash Tool (QFIL) Download QPST
Qualcomm USB Drivers Download Drivers

šŸ“‹ Instructions Before Flashing

Important: Always verify the firmware version matches your phone’s build. Charge the Vivo PD1401F to at least 50% before starting. Use a quality USB cable and backup all personal data as flashing wipes the device.

🧰 How to Flash Vivo PD1401F using QFIL (Qualcomm Flash Tool)

  1. Install Qualcomm USB drivers on your PC (Windows).
  2. Extract the downloaded firmware using WinRAR or 7-Zip.
  3. Launch QFIL Tool from the QPST package.
  4. Set Build Type to Flat Build.
  5. Click Browse next to “Programmer Path” and select the prog_emmc_firehose_****.mbn file.
  6. Click Load XML and select rawprogram.xml, then patch.xml.
  7. Put the device in EDL Mode via Test Point or USB method.
  8. Once Vivo PD1401F appears in Device Manager (Qualcomm HS-USB QDLoader), click Download.
  9. Flashing process will start and complete within 5-10 minutes.

šŸ” Firmware Info

  • Model: Vivo PD1401F
  • CPU: Qualcomm Snapdragon (MSM series)
  • Format: QFIL (EDL Mode)
  • Files Included: MBN, rawprogram.xml, patch.xml, boot.img, vbmeta
  • Build: PD1401F_EX_A_1.14.22

Note: Don’t flash with the wrong build or region. For Vivo Qualcomm phones, always ensure EDL mode entry is clean. If the phone doesn’t boot after flash, try “Format All + Download” cautiously.

šŸ’¬ Troubleshooting & Help

If you face any QFIL errors (e.g., Sahara, Firehose fail, etc.), check the USB port, driver installation, or try flashing without battery. You can ask questions in the comments or check solutions for Vivo PD1401F dead boot, logo stuck, and fastboot stuck on Firmware4Mobile.com.

Post a Comment

0 Comments

Please Select Embedded Mode To show the Comment System.*

#buttons=(Ok, Go it!) #days=(20)

Our website uses cookies to enhance your experience. Check Now
Ok, Go it!