Vivo X30 Pro PD1938 Firmware Flash File | Solve Qualcomm CrashLoop with Clean ROM

MR MOBILE
0

Having issues like black screen after flashing, boot stuck on logo, or dm-verity verification failed? This page provides the tested Vivo X30 Pro PD1938_A_1.16.7 firmware and detailed flashing instructions using the QFIL Flash Tool to restore your phone to working condition.

šŸ”§ Problems Fixed by Vivo X30 Pro Firmware Flash

  • Fix bootloop, fastboot stuck, or restart on logo
  • Dead boot recovery via Qualcomm EDL mode
  • Touch not working after wrong flash
  • Operating system corruption or no display
  • Re-flash stock boot.img, vbmeta.img, and system.img

⚠️ Flashing Precautions (Must Read)

Always match the firmware version with your device model number. Use the correct PD1938 build only. Make sure your device is charged at least 60% and backup all data—flashing will erase everything.

šŸ› ️ How to Flash Vivo X30 Pro PD1938 Firmware using QFIL (Qualcomm)

  1. Install Qualcomm USB Drivers on your computer.
  2. Extract the downloaded Vivo X30 Pro firmware using 7Zip or WinRAR.
  3. Open the QFIL Tool from the QPST folder.
  4. Select Flat Build mode.
  5. Click on Browse and select prog_emmc_firehose_*.mbn from the extracted firmware folder.
  6. Click Load XML and first select rawprogram.xml, then patch.xml.
  7. Boot your Vivo X30 Pro into EDL mode using test point method and connect it via USB.
  8. Ensure Qualcomm HS-USB QDLoader 9008 appears in Device Manager.
  9. Click the Download button in QFIL to begin the flash.

✅ Flashing will take a few minutes. Your phone will automatically reboot once the firmware is successfully installed.

šŸ“¦ Download Vivo X30 Pro PD1938 Firmware & Tools

File NameDownload Link
šŸ“ PD1938_A_1.16.7 Firmware (QFIL Format) Download
šŸ”§ QFIL Tool (QPST Suite) Download
šŸ–„️ Qualcomm USB Drivers Download

šŸ’” FAQs & Flashing Tips

  • Q: Does this fix Vivo X30 Pro black screen issue?
    A: Yes, if it's a software issue caused by incorrect flashing or OS corruption.
  • Q: Will this firmware remove FRP or Mi account?
    A: No. This firmware only restores the stock OS. FRP requires separate steps.
  • Q: QFIL doesn't detect the phone?
    A: Check USB drivers and ensure the device is properly in EDL mode.

Post a Comment

0 Comments

Please Select Embedded Mode To show the Comment System.*

#buttons=(Ok, Go it!) #days=(20)

Our website uses cookies to enhance your experience. Check Now
Ok, Go it!