Download FIGI Note 3 Stock Firmware & Flashing Instructions
If your FIGI Note 3 is not turning on, stuck on the logo, or showing system errors, flashing the official stock ROM can restore your phone. This firmware helps fix software issues like dead boot, black screen, Fastboot stuck, or touch not working after a failed flash.
Common Problems Solved by This Firmware
- Stuck on FIGI logo or boot loop issue
- Dead after flashing or wrong update
- Touchscreen not responding
- dm-verity verification failed
- Fastboot mode stuck or OS errors
Important Note:
Always check your FIGI Note 3 model number and firmware build before flashing. Make sure the phone battery is charged at least 50% to avoid interruptions during the flashing process.
Flashing Guide for FIGI Note 3 (Step-by-Step)
- Download and install MediaTek USB Drivers on your PC.
- Extract the downloaded firmware ZIP using 7-Zip or WinRAR.
- Open SP Flash Tool and run the Flash_tool.exe file.
- Load the scatter file from the firmware folder by clicking "Scatter-loading".
- Add the DA Auth file (if required).
- Click the "Download" button on the SP Flash Tool.
- Turn off your phone or remove and reinsert the battery if possible.
- Connect your FIGI Note 3 to the PC via USB cable.
- The flashing will start and may take 7 to 10 minutes to complete.
- Once the process is complete, a green checkmark will appear.
⚠️ Data Loss Warning
Flashing this firmware will delete all data on your phone. Please back up important files before proceeding. Using the wrong build may cause permanent damage to the device.
Firmware & Tools Download Links
š¦ Official Firmware:
Download FIGI Note 3 Firmware
Download FIGI Note 3 Firmware
Disclaimer: All content provided here is for educational purposes. Flashing is done at your own risk. Make sure to use the correct firmware for your model to avoid device damage.