FIGI Note 11 Stock Firmware Flash File – Official ROM Download & Installation Guide
If your FIGI Note 11 is stuck on the logo, not turning on, or facing system errors, you're in the right place. This guide provides the official FIGI Note 11 flash file to repair the software and bring your device back to life. Whether it's a dead boot, fastboot loop, or dm-verity verification failed error, this ROM can fix it.
FIGI Note 11 Common Software Issues
- Bootloop or hang on logo screen
- Black screen after flashing or update
- Touch not working after firmware flash
- OS crashing or stuck in Fastboot mode
- dm-verity verification or boot image mismatch errors
Important Guidelines Before Flashing
⚠️ Caution: Flashing firmware will erase all data from the phone. Please backup important contacts, files, and media before continuing. Always use the correct build version matching your device model to avoid any permanent damage.
How to Flash FIGI Note 11 Stock ROM (Step-by-Step)
- Download and install MTK USB Drivers on your PC.
- Extract the FIGI Note 11 firmware zip using 7-Zip or WinRAR.
- Open SP Flash Tool and run
flash_tool.exe
. - Click "Scatter-loading" and select the scatter.txt file from the extracted firmware folder.
- Also load the DA Auth File for secure boot.
- Click "Download" in SP Flash Tool.
- Turn off the phone completely, or reinsert the battery (if removable).
- Connect your FIGI Note 11 via USB. The flashing will begin automatically.
- Wait 7–10 minutes. When the green check mark appears, you’re done.
Post-Flashing Tip
After flashing, the first boot may take longer than usual (3–10 minutes). If the phone does not start, repeat the process using the correct DA and scatter file. Always verify that you're flashing the correct firmware variant.
Download Links for FIGI Note 11 Firmware Tools
Download FIGI Note 11 Firmware 3/32
Disclaimer: Flashing stock ROM is an advanced process. Do this at your own risk. We are not responsible for any damage caused due to incorrect flashing or wrong file usage.