FIGI Note 1 Pro Firmware Download & Flashing Instructions
Is your FIGI Note 1 Pro stuck on the boot logo, facing system errors, or showing a black screen after flashing? This official stock ROM will help you restore your phone to working condition. The firmware includes boot.img, vbmeta, and system files needed to repair your software.
🛠 What Issues This Firmware Can Fix:
- Dead boot or not powering on
- After flash touch not working
- Stuck in Fastboot or boot logo
- dm-verity verification failed error
- FIGI Note 1 Pro OS crashing or hanging
Before You Flash:
Make sure the firmware version matches your FIGI Note 1 Pro build number. Charge your phone to at least 50%. Using the wrong files may damage your phone permanently.
How to Flash FIGI Note 1 Pro with SP Flash Tool
- Install the MediaTek USB Drivers on your PC.
- Extract the downloaded firmware ZIP using 7-Zip or WinRAR.
- Download and open SP Flash Tool.
- Click on “Scatter-loading” and select the scatter file from the firmware folder.
- If required, add the DA Auth file.
- Press the "Download" button.
- Switch off your phone and connect it to the PC with a USB cable.
- The flashing process will begin. Wait for the green tick to confirm completion.
⛔ Important: This process will erase all data from your device. Please back up everything important before flashing.
📥 Download FIGI Note 1 Pro Firmware & Tools
📁 Official Firmware:
Download FIGI Note 1 Pro Stock ROM
Download FIGI Note 1 Pro Stock ROM
Disclaimer: Flashing firmware carries some risk. Please follow instructions carefully and use only the correct files for your phone. We are not responsible for any damage caused by incorrect flashing.