Download FIGI Note 1 Firmware (Official Stock ROM)
If your FIGI Note 1 is stuck on the logo, showing a black screen after flash, or not booting at all — don't worry! This official stock firmware will help you bring your phone back to life. Whether you're fixing dead boot, OS errors, or dm-verity failed issues, flashing the correct ROM will solve most problems.
š Issues You Can Fix With This Flash File:
- FIGI Note 1 not turning on (dead boot)
- Touch not responding after flash
- Stuck on fastboot or boot logo
- dm-verity verification failed error
- OS corruption or lagging issues
⚠️ Important Pre-Flash Instructions:
Always check your phone's exact variant (3GB/32GB or 4GB/64GB) and use the matching firmware. Also, ensure your battery is above 50% and use original USB cable for stable flashing.
⚠️ Warning: Flashing will erase all personal data from your phone. Backup your contacts, photos, and important files before proceeding. Using the wrong build version may brick your device.
š” How to Flash FIGI Note 1 Using SP Flash Tool
- Install MediaTek USB drivers on your computer.
- Extract the downloaded firmware using 7-Zip or WinRAR.
- Open SP Flash Tool and load the scatter file.
- Load DA Auth File if needed.
- Click the "Download" button on the tool.
- Power off your phone and connect it to your PC using a USB cable.
- The flashing process will start. Wait until you see the green success message.
š„ FIGI Note 1 Firmware Download Links
Download FIGI Note 1 (3/32) Stock ROM
Download FIGI Note 1 (4/64) Stock ROM
š§° Required Tools & Drivers
Need Help? If you're unsure about any step, leave a comment on our YouTube videos or search your specific phone model on our site for more repair tutorials.
Note: This guide is for educational purposes only. Flashing is risky if done improperly. Proceed at your own responsibility.