Nokia G10 TA-1334 Stock ROM Flashing Guide Firmware Rom

This is a guide for flashing the official Stock ROM on Nokia G10 (Model: TA-1334). Follow the steps carefully to avoid any errors.

Note: Flashing will erase all user data. Proceed at your own risk.

✔ Required Files Downloads Here

1. SP Flash Tool (With Auth) – Kurdish Tool:
   Kurdish-Tool-Flash-Tool-with-Auth
2. USB Drivers:
   Mtk-Usb-Drivers
3. Nokia G10 TA-1334 Stock ROM (Tested):
   TA-1334_MT6765_HMD_Global_00WW_11_00WW_1_070 Rom

✔ Preparation Steps

1. Extract all downloaded files using WinRAR.
2. Install MTK USB Drivers properly.
3. Disable antivirus temporarily before opening the flash tool.
4. Open SP Flash Tool from its extracted folder.
5. Click on Scatter-loading and load:
   MT6765_Android_scatter.txt
6. Tick the Bypass Auth option at the top.

✔ Flashing Process

1. Click the Download button inside SP Flash Tool.
2. Disassemble the phone carefully.
3. Locate the Nokia G10 TA-1334 test-point.
4. Short the test-point with the GND (ground) point.
5. While shorting, connect the USB cable to the PC.
6. The flashing process will start automatically.
7. Wait until you see a green success message.

Warning: Test-point method can damage hardware if done incorrectly. Perform at your own responsibility.

✔ After Flashing

• Disconnect the phone and power it on.
• First boot may take 5–10 minutes.

✔ Need Help?

If you need assistance or run into any problem, feel free to contact us on our channel or Facebook account. We will guide you step-by-step.

✔ Disclaimer

This guide is for educational purposes only. We are not responsible for any damage, data loss, or misuse of the files.