Infinix XPad X1101 Stock ROM | Official Flash Guide

Mr Mobile
0

šŸ’» Infinix XPad X1101 Firmware Flash Guide

ℹ️ Tablet-Specific Notes

The Infinix XPad X1101 features unique firmware requirements due to its:

  • Large 11-inch display drivers
  • Tablet-optimized Android Go edition
  • Extended battery management system
  • Dual speaker audio configuration

šŸ“ Firmware Package Structure

X1101-H5566DEF-R-EE-20240630
├── preloader_X1101.bin
├── lk.bin
├── boot.img
├── system.img
├── vendor.img
├── android_scatter.txt
├── tablet_display_cfg.bin
└── battery_calibration.dat

⚙️ Flashing Requirements

Hardware:
  • Original USB-C cable (2m max length)
  • Windows PC with USB 3.0 port
  • Stable power source (tablets need more power)
Software:
  • SP Flash Tool v5.2405+
  • MTK USB Drivers v1.2.1
  • 7-Zip 23.01+ for extraction
Device:
  • Minimum 30% battery
  • Disabled screen lock
  • Backed up display calibration

šŸ”§ Tablet Flashing Process

Step 1: Extract firmware to folder (avoid desktop locations)

Step 2: Install MTK USB drivers (disable driver signature enforcement)

Step 3: Launch SP Flash Tool as Administrator

Step 4: Load android_scatter.txt

Step 5: Select Download Only mode

Step 6: Power off tablet completely

Step 7: Hold Volume Up + Power for 20 seconds

Step 8: Connect USB cable (keep buttons pressed for 5s)

Step 9: Click Download (process takes 7-10 minutes)

Step 10: First boot may take 12-15 minutes

⚠️ Critical Tablet Warnings

  • Never flash without battery_calibration.dat
  • Avoid flashing in cold environments (<15°C)
  • Tablet displays may flicker during flash (normal)
  • Keep tablet flat on non-conductive surface

Tablet-Specific Errors

Error Solution
Display Not Working After Flash Re-flash tablet_display_cfg.bin
Battery Percentage Stuck Recalibrate using service code
S_DA_TABLET_MODE_FAIL (0x7E1) Use shorter USB cable

Post-Flash Verification

  1. Check touchscreen responsiveness
  2. Verify both speakers work
  3. Test auto-rotation functionality
  4. Calibrate battery (full charge/discharge cycle)

🚨 Legal Disclaimer

This guide is for educational purposes only. The Infinix XPad X1101 firmware is copyrighted by Infinix Mobility. We do not host or distribute any firmware files. Obtain official firmware through:

  • Infinix authorized service centers
  • Official OTA updates
  • Infinix Tablet Support Portal

Unauthorized flashing may void warranty and damage tablet components.

Post a Comment

0 Comments

Please Select Embedded Mode To show the Comment System.*

#buttons=(Ok, Go it!) #days=(20)

Our website uses cookies to enhance your experience. Check Now
Ok, Go it!