Infinix Hot 50 4G X6882B Firmware | IMEI Repair Dead Boot Fix

Mr Mobile
0

⚠️ Infinix Hot 50 4G X6882B Firmware Solution

šŸ”§ Critical Fixes Included

This official firmware package resolves:

  • Dead boot (no power/no charge)
  • Hang on Infinix logo
  • IMEI null/unknown issues
  • Baseband unknown errors
  • FRP lock removal

šŸ“¦ Firmware Package Details

X6882B-H6789DEF-R-EE-20240625
├── preloader_X6882B.bin
├── lk.bin
├── boot.img
├── super.img
├── nvdata.img (IMEI backup)
├── nvram.img
├── MT6789_Android_scatter.txt
└── checksum.md5

⚙️ Required Tools

  • SP Flash Tool v5.2310+ (MediaTek version)
  • MTK USB Drivers v1.1.2
  • Original USB cable (3A rated)
  • Windows 10/11 64-bit
  • At least 8GB free space

šŸ”Œ Dead Boot Recovery Process

Step 1: Extract firmware to folder (no special characters)

Step 2: Install MTK USB drivers (disable driver signature enforcement)

Step 3: Launch SP Flash Tool as Administrator

Step 4: Load scatter file and select Firmware Upgrade

Step 5: For dead devices: Hold Vol Down + Power for 30s

Step 6: Connect USB while keeping buttons pressed

Step 7: Click Download (process takes 5-8 minutes)

šŸ”‘ IMEI Repair Procedure

  1. After successful flash, boot to Factory Mode (*#*#3646633#*#*)
  2. Navigate to Connectivity → CDS Information
  3. Select Radio Information
  4. Enter AT commands to restore IMEI (requires original IMEI numbers)
  5. Reboot and verify with *#06#

Common Errors Solutions

Error Solution
Hang on Logo After Flash Format All + Download in SP Flash Tool
IMEI Still Null Restore nvdata.img separately
S_DA_HW_BROM_FAIL (0x7D3) Use different USB port (USB 2.0 recommended)

🚨 Legal Disclaimer

This guide is for educational purposes only. We do not host or distribute Infinix firmware files. Official firmware must be obtained through:

  • Infinix official service centers
  • Authorized repair shops
  • OTA system updates

IMEI modification may violate telecommunications regulations in your country. Always backup original IMEI before any repair attempts.

šŸ’” Professional Tips

  • For persistent dead boot: Try Battery Disconnect Method (remove battery for 5 mins)
  • Always verify firmware checksum before flashing
  • Keep device on charger during entire process

Post a Comment

0 Comments

Please Select Embedded Mode To show the Comment System.*

#buttons=(Ok, Go it!) #days=(20)

Our website uses cookies to enhance your experience. Check Now
Ok, Go it!