š„ Download the official Obi Falcon S451 Stock ROM and firmware flash files to fix various software issues on your device. This firmware is designed to help repair problems like dead boot, black screen after flash, touchscreen not responding, and fastboot mode stuck. Restore your Obi Falcon S451 safely with these genuine stock ROM files.
⚙️ The firmware package includes essential files such as boot.img, vbmeta.img, and the scatter file needed for flashing with the MediaTek SP Flash Tool.
Important Before Flashing:
Make sure to download the firmware files that exactly match your Obi Falcon S451 model and build version. Also, ensure your phone battery is fully charged before starting the flashing process to avoid interruptions.
| On this page, you can download the official Obi Falcon S451 stock ROM flash file. This firmware helps repair the operating system and recover the device from dead boot issues. The Obi Falcon S451 is powered by a MediaTek CPU, so flashing is performed with the MediaTek SP Flash Tool. The firmware files come in a ZIP archive. After downloading, extract them using 7-Zip or WinRAR before flashing. |
Warning!
Flashing firmware will erase all data on your Obi Falcon S451. Back up all important data before proceeding. Avoid using incorrect or incompatible firmware files to prevent damage to your device.
First, install the Obi Falcon S451 USB drivers on your computer. Then extract the firmware package using WinRAR or 7-Zip.
Always verify your Obi Falcon S451 model and firmware version before starting the flashing process.
How to Flash Obi Falcon S451 Firmware Using SP Flash Tool
- Download and extract the Obi Falcon S451 firmware package.
- Install MediaTek USB drivers on your PC.
- Open the SP Flash Tool folder and launch
flash_tool.exe.- Click the Scatter-loading button and select the
MT6XXX_Android_scatter.txtfile from the firmware folder.- If applicable, load Obi Falcon S451 DA/Auth files in the SP Flash Tool.
- Click the Download button in the SP Flash Tool.
- Power off your Obi Falcon S451. If removable, remove and reinsert the battery.
- Connect your phone to the PC via USB cable.
- The MTK port will appear in the device manager, and the flashing process will start.
- The flashing usually takes 7–8 minutes. Do not disconnect the device during this process.
- After completion, a green checkmark will appear. Disconnect and power on your phone.
If you face any issues during flashing or have questions, please leave a comment on our videos or tutorials. You can also search our website for detailed repair methods specific to your phone model.