š„ Download the official Obi S450 Stock ROM and firmware flash files to fix software issues on your device. This firmware is perfect for repairing problems such as dead boot, black screen after flash, touchscreen not working, and fastboot mode stuck. Restore your Obi S450 safely and quickly using these genuine stock ROM files.
⚙️ The firmware package contains important files like boot.img, vbmeta.img, and the scatter file, required for flashing via the MediaTek SP Flash Tool.
Important Before Flashing:
Ensure the firmware files you download match exactly your Obi S450 model and build version. Also, make sure your phone battery is fully charged before starting the flashing process to prevent any interruptions.
| On this page, you can download the official Obi S450 stock ROM and firmware flash files. These files help repair your phone’s operating system and recover it from dead boot errors. This is the official stock ROM for Obi S450. Since the Obi S450 is powered by a MediaTek chipset, flashing should be done using the MediaTek SP Flash Tool. The firmware files come in a ZIP archive. After downloading, extract them using 7-Zip or WinRAR before flashing. |
Warning!
Flashing firmware will erase all data on your Obi S450. Please back up all important files before proceeding. Do not use firmware files that do not correspond to your device’s exact build version, as this may cause permanent damage.
First, install the Obi S450 USB drivers on your computer. Then extract the firmware files using WinRAR or 7-Zip.
Always check your Obi S450 model and firmware version carefully before flashing to avoid any errors.
How to Flash Obi S450 Firmware Using SP Flash Tool
- Download and extract the Obi S450 firmware package.
- Install MediaTek USB drivers on your PC.
- Open the SP Flash Tool folder and launch
flash_tool.exe.- Click the Scatter-loading button and select the
MT6XXX_Android_scatter.txtfile from the extracted firmware folder.- If available, load Obi S450 DA/Auth files in SP Flash Tool.
- Click the Download button in SP Flash Tool.
- Turn off your Obi S450. If removable, remove and reinsert the battery.
- Connect your phone to the PC using a USB cable.
- The MTK port will appear in your computer’s device manager, and the flashing process will begin automatically.
- The process usually takes 7–8 minutes. Do not disconnect the device during flashing.
- Once completed, a green checkmark will show. Disconnect your phone and power it on.
If you encounter any issues during flashing or have questions, feel free to leave a comment on our videos or tutorials. You can also search our website for detailed repair guides for your phone model.