Huawei LND-TL00 Official Flash File – EMUI 8.0 Firmware Installation (Full Guide)
Is your Huawei Honor 7C LND-TL00 stuck on the logo, showing errors during boot, or having software-related issues? Reinstalling the official EMUI 8.0 firmware can help restore the device’s stability and fix system bugs. Below is the complete flashing procedure for the LND-TL00 model.
📱 Device Specifications
- Model: Huawei Honor 7C – LND-TL00
- Firmware: EMUI 8.0
- Processor: Qualcomm Snapdragon
- Flash Method: UMT QCfire (Test Point/EDL Mode)
📦 Required Downloads
⚠️ Important Precautions
Backup First: Flashing will erase all personal data from your phone. Please back up your files, apps, and contacts to avoid data loss. Use only the correct firmware for your exact model.
🧰 Tools Needed
- Windows PC or Laptop
- UMT QCfire Tool (or supported Qualcomm flasher)
- USB Data Cable
- 7-Zip or WinRAR (to extract firmware)
🧪 Test Point Image
🔧 Flashing Instructions for Huawei LND-TL00
- Download and install Qualcomm USB Drivers on your PC.
- Extract the firmware zip file using 7-Zip or WinRAR.
- Launch UMT QCfire tool.
- Turn off your phone completely.
- Use the test point (as shown in the image above) to enter EDL mode and connect your phone to the PC.
- In UMT QCfire, load the extracted firmware XML file.
- Click the “Flash” button to begin installation.
- Wait until the tool confirms completion. The device will reboot into the OS.
📁 Firmware & Driver Resources
| 📁 LND-TL00 Board Software (v1.0.0.37) |
| 💾 Qualcomm Drivers for Huawei Honor 7C |
This guide is intended for technicians and advanced users. If you are unsure about any step, it’s best to consult a service expert. Flashing the wrong firmware version may cause boot issues.