Huawei LND-AL10 Flash File – EMUI 8.0 Official Stock ROM Installation
If your Huawei Honor 7C (Model LND-AL10) is experiencing issues such as stuck on the logo, software errors, or boot looping after a system update, flashing the correct stock firmware can resolve most of these issues. This guide will help you reinstall the EMUI 8.0 OS using board software via UMT QCfire tool.
📱 Device Specification
- Device Name: Huawei Honor 7C
- Model: LND-AL10
- EMUI Version: 8.0
- Chipset: Qualcomm
- Flash Method: UMT QCfire (EDL/Test Point Mode)
📦 Download Required Files
⚠️ Important Notes Before Flashing
Backup Your Data: Flashing firmware will erase internal storage. Make sure to backup your contacts, photos, and other important files before proceeding.
🧰 Requirements
- UMT QCfire Tool (or similar Qualcomm flash tool)
- USB Data Cable
- Windows PC
- 7-Zip or WinRAR to extract the firmware
📸 Test Point Picture
🔧 Flashing Procedure for Huawei LND-AL10
- Install Qualcomm USB drivers on your PC.
- Extract the downloaded firmware using WinRAR or 7-Zip.
- Open UMT QCfire tool on your computer.
- Power off the phone completely.
- Connect phone to PC using Test Point (EDL Mode) method shown above.
- In QCfire, load the XML or APP file from the extracted firmware folder.
- Click on the “Flash” button to start the software installation.
- Wait until the tool finishes flashing. The phone will auto-reboot into EMUI 8.0 OS.
📋 Flash File Summary
| 📁 Download Board Software (v1.0.0.37) |
| 💾 Qualcomm Drivers for Huawei LND-AL10 |
For best results, ensure your phone battery is charged above 50%. Avoid flashing if the firmware version doesn’t match your model. If unsure, consult a technician.