Download & Install Huawei LND-AL40 Stock Firmware (Honor 7C China)
If your Huawei LND-AL40 is stuck on logo, freezing, or facing software instability issues, flashing the official stock ROM is the best solution. This firmware rebuilds the system and resolves most software-related problems.
š± Device Information
- Model: Huawei Honor 7C (LND-AL40)
- Region: China C00
- Build Number: 8.0.0.224 (EMUI 8.0)
- CPU Type: Qualcomm
š Firmware & Drivers
⚠️ Important Preparation Before Flashing
Backup Reminder: Flashing will erase all user data. Please back up your phone before proceeding. Also, verify the firmware version matches your device variant (LND-AL40 C00).
š§° What You Need
- Firmware ZIP file with UPDATE.APP
- UMT Qcfire Tool or similar Qualcomm flashing tool
- Windows PC with installed drivers
- USB cable and internet connection
š· Test Point Image for EDL Mode

š§š§ How to Flash Huawei LND-AL40 Using UMT Qcfire
- Extract the downloaded firmware using 7Zip or WinRAR.
- Install Qualcomm drivers on your PC if not already installed.
- Launch the UMT Qcfire Tool on your computer.
- Power off the phone and short the test point to GND, then connect to PC via USB.
- Phone should now enter EDL (9008) mode automatically.
- In Qcfire tool, load the UPDATE.APP XML firmware file.
- Click Flash to begin installation. Wait until it completes.
- Once done, disconnect and power on your phone normally.
š Extra Tips
If your phone doesn’t boot on first attempt, perform a long press on the power key or charge for 10–15 minutes and try again.
š Quick Resource Table
Huawei Honor 7C LND-AL40 Firmware Download |
Qualcomm USB Drivers (Official) |
If you face any issue while flashing, feel free to ask in the comments section or reach out via our YouTube tutorials for support.