Huawei Honor 7C LND-AL00 Firmware Flash File – Software Installation Guide
If your Huawei LND-AL00 smartphone is facing system glitches, stuck on boot logo, or experiencing unresponsive touch after a failed update, flashing the official firmware can restore it to factory condition. This guide provides secure links and step-by-step flashing instructions for EMUI 8.0 users.
š± Model Info
- Device: Honor 7C (Model: LND-AL00)
- Software Version: EMUI 8.0
- Firmware Package: 1.0.0.37 Board Software
- CPU Type: Qualcomm
š Firmware Download Links
⚠️ Before You Flash
Important: Ensure the firmware version matches your phone's build number (LND-AL00). Back up all important data, as flashing will remove everything from internal storage.
š§° What You’ll Need
- Extracted UPDATE.APP file (from the firmware package)
- UMT QCfire Tool or compatible flash tool
- Windows PC with USB support and drivers installed
- Standard USB cable
š¼ Test Point for Flashing Mode (EDL)
š§ Flashing Instructions for Huawei LND-AL00
- Extract the firmware ZIP using 7-Zip or WinRAR to get the UPDATE.APP file.
- Install Qualcomm USB drivers on your PC if not already installed.
- Open UMT QCfire or supported flashing tool.
- Power off your phone. Use the test point to put it into EDL mode and connect it to the computer using a USB cable.
- Once detected, load the XML files from the firmware folder into the tool.
- Click Start or Flash to begin the firmware installation.
- After completion, disconnect the phone and boot normally.
š Troubleshooting
If the device doesn’t turn on after flashing, hold the power button for 10–15 seconds or plug in the charger for a few minutes.
š„ Quick Access Table
| Huawei LND-AL00 Firmware (v1.0.0.37) |
| Qualcomm USB Drivers |
Note: Always verify the region and build before proceeding with any software upgrade. Using mismatched files may lead to system instability.