Download Official FIGI Note 5 Stock ROM – Flash File Repair Guide
Is your FIGI Note 5 not booting properly, stuck on fastboot mode, or facing OS software errors? Don’t worry — this official firmware will help you revive your smartphone. Whether you’re dealing with dead boot issues, a black screen after flashing, or the touch not working, flashing the original FIGI Note 5 flash file can restore everything.
This scatter firmware is specially packed for MediaTek-powered FIGI Note 5. You can use the SP Flash Tool to perform the installation. Always check the build number before proceeding to avoid errors like dm verity verification failed or invalid scatter file. Once flashed, this ROM will fix multiple issues like hang on logo, IMEI repair, FRP lock, and OS-related crashes.
Before flashing, install FIGI Note 5 USB drivers on your PC and fully extract the downloaded zip files using 7zip or WinRAR. Flash only the matching firmware for your specific model number and software build.
How to Flash FIGI Note 5 Using SP Flash Tool
- 1. Install MTK USB drivers on your computer.
- 2. Open SP Flash Tool and load the scatter.txt file from the extracted FIGI Note 5 firmware folder.
- 3. Power off your mobile device completely.
- 4. Press and hold the volume down button.
- 5. Connect the phone via a USB cable — flashing will begin automatically.
- 6. Wait until the process is 100% complete before disconnecting your device.
Common flashing errors such as after flash dead, FRP bypass not working, system mount failed, red state error, or touch not working are usually due to wrong scatter files or incomplete firmware. This official ROM is tested and safe to use if steps are followed correctly.