Vivo Y70S V2002A Flash File Firmware to Solve Qualcomm Restart and Boot Loop Problems

MR MOBILE
0

Download Vivo Y70S V2002A Firmware (Official Flash File)

If your Vivo Y70S V2002A smartphone is facing system errors, bootloop, stuck in fastboot mode, or has stopped responding after a failed update, then flashing the stock ROM can restore its original factory software. This page contains the official Vivo Y70S V2002A firmware along with a detailed flashing guide using QFIL (Qualcomm Flash Tool).

Common Issues Fixed by Flashing

  • Vivo Y70S V2002A stuck on logo or fastboot screen
  • Touch not working after software update
  • dm-verity verification failed error
  • Boot failure or dead boot (no response)
  • OS crash or black screen after flash
Vivo Y70S Flash Guide
⚠️ Important Pre-Flashing Tips:
✔ Ensure battery level is above 60% before flashing.
✔ Only use firmware that matches your device's model and software version.
✔ Back up all personal data—flashing will erase everything.

Vivo Y70S V2002A Firmware Details

Firmware Information
ModelVivo Y70S V2002A
ChipsetQualcomm Snapdragon
Build VersionPD2002_A_1.7.23
Flash ToolQFIL (QPST Package)
File TypeScatter-based ZIP (Extract before use)

Firmware Download Links

Download Stock ROM + Tools
šŸ“„ Vivo Y70S V2002A Firmware - PD2002_A_1.7.23
šŸ“ QFIL Flash Tool (QPST)
🧩 Qualcomm USB Drivers

How to Flash Vivo Y70S V2002A (Step-by-Step)

  1. Download and extract the firmware package using WinRAR or 7-Zip.
  2. Install Qualcomm USB Drivers on your PC.
  3. Launch QFIL Tool from the QPST folder.
  4. Select Flat Build in the QFIL interface.
  5. Click Browse and choose prog_emmc_firehose_*.mbn from firmware folder.
  6. Click Load XML and select rawprogram.xml and patch.xml files.
  7. Power off the device and connect it in EDL mode (use test points if needed).
  8. Click the Download button to start flashing.

Troubleshooting Flash Errors

If you face any issues such as the tool not detecting the phone, flashing stuck at 0%, or the phone not booting after flash:

  • Ensure the correct USB drivers are installed
  • Use a working USB cable and USB 2.0 port
  • Repeat the flash using a different PC
  • Verify that you're using the correct and latest firmware

Need Help? Leave your question in the comments section of our posts on firmware4mobile.com and we will try to help you with tested solutions.


Disclaimer: Flashing firmware is a technical process. Proceed at your own risk. We are not responsible for any damage caused by following this guide.

Post a Comment

0 Comments

Please Select Embedded Mode To show the Comment System.*

#buttons=(Ok, Go it!) #days=(20)

Our website uses cookies to enhance your experience. Check Now
Ok, Go it!