Download the official Vivo Y28 PD1403W Flash File to fix dead boot, software issues, bootloop, and black screen errors. This firmware is tested and supports flashing through the SP Flash Tool with DA Auth support. Whether your device is stuck on Fastboot Mode or showing dm-verity verification failed, this guide provides a complete flashing solution.
🛠️ Common Problems Fixed With This Firmware
- Vivo Y28 PD1403W stuck on logo / bootloop
- After flash touch not working
- Blank or black screen after flashing
- OS crash or software error
- Fastboot mode stuck / DM Verity Error
- Dead boot (MTK 6582 CPU)
⚠️ Important Precautions Before Flashing
Make sure you are flashing the correct build: PD1403W_EX_B_5.2.13. Backup all important data — flashing will erase everything. Use original USB cable and avoid power loss during the process.
🔧 Required Tools for Vivo Y28 PD1403W Flash
- ✔️ SP Flash Tool
- ✔️ MTK USB Drivers
- ✔️ Vivo Y28 DA Auth File
- ✔️ MCT Bypass Tool
- ✔️ Scatter firmware package
📥 How to Flash Vivo Y28 PD1403W Using SP Flash Tool
- Install MediaTek USB Drivers on your computer.
- Extract the firmware, SP Flash Tool, and DA file using 7zip or WinRAR.
- Run the MCT Bypass Tool and click "Bypass".
- Power off the phone completely.
- Press and hold both volume buttons and connect the phone via USB.
- Wait for the MTK port to appear in Device Manager.
- Open SP Flash Tool → Go to
Connection→ Select UART → Choose correct COM Port. - Set Baud Rate to
921600. - In SP Flash Tool, load the DA file under the "Download Agent" section.
- Load the
MT6582_Android_scatter.txtfile from the firmware folder. - Click on the green Download button to start flashing.
📢 Note: If flashing fails or the phone stays dead, make sure DA file and correct scatter version are used. Also recheck USB driver installation.
⬇️ Download Links for Vivo Y28 PD1403W Firmware
| File | Link |
|---|---|
| 📁 Vivo Y28 PD1403W Firmware (Scatter File) | Download |
| 🧰 SP Flash Tool | Download Tool |
| 🔌 MTK USB Drivers | Download Drivers |
❓ Frequently Asked Questions
- Q: Can I use this file for Vivo Y28i or other variants?
A: No, this firmware is only for model PD1403W. - Q: Will flashing remove FRP?
A: No, it will not remove Google FRP lock. Use separate FRP tools for that. - Q: My device is not detected by SP Flash Tool. What should I do?
A: Reinstall MTK drivers, use another USB port, or try a different PC.
For more official firmware files and complete flashing guides, visit Firmware4Mobile.com. If you need help or the firmware is not working, leave a comment below.