Vivo Y27 PD1410F Firmware Flash File | 100% Working Flash File with QFIL Method

MR MOBILE
0

✅ Vivo Y27 Stock ROM | QFIL Flash File (PD1410F_EX_B_3.10.10)

Is your Vivo Y27 not booting, stuck at the logo, or showing a black screen after flashing? This post provides the official Qualcomm-based stock firmware and flashing guide to fix software-related issues on the Vivo Y27. Whether you're facing dm-verity errors, dead boot, or touch not working after flash — this firmware can help restore your device.

🛠️ Vivo Y27 Flash File | Issues Fixed

  • Bootloop / stuck on logo
  • Fastboot mode error fix
  • Vivo Y27 black screen after flash
  • Touch not working after update
  • dm-verity verification failed
  • Dead boot or Qualcomm 9008 detection

📋 Important Pre-Flash Checklist

Before flashing: Ensure your phone's model is Vivo Y27 PD1410F and the battery is at least 60% charged. Backup all data — flashing will erase everything on the internal storage.

📦 Required Files & Tools

  • ✔️ Vivo Y27 Firmware (QFIL Format)
  • ✔️ Qualcomm USB Drivers
  • ✔️ QPST/QFIL Flash Tool
  • ✔️ Windows PC and USB cable

🔧 How to Flash Vivo Y27 Stock Firmware

  1. Install Qualcomm USB Drivers on your computer.
  2. Extract the Vivo Y27 firmware and QPST/QFIL tool using WinRAR or 7-Zip.
  3. Launch QFIL Tool and select Flat Build.
  4. Browse and select prog_emmc_firehose.mbn from the firmware folder.
  5. Click Load XML and load both rawprogram.xml and patch.xml.
  6. Power off the phone and boot it into EDL (Emergency Download Mode) using the test point method.
  7. Once the phone is detected (Qualcomm port will show in Device Manager), click Download in QFIL.
  8. Flashing will begin and complete in a few minutes. Do not disconnect the cable.
📌 Note: If your device is not detected, try reinstalling the Qualcomm drivers or use a different USB port.

⬇️ Download Links | Vivo Y27 Flash File & Tools

File Name Download Link
📁 Vivo Y27 Firmware (PD1410F_EX_B_3.10.10) Download
🔧 QPST Flash Tool (with QFIL) Download Tool
🧰 Qualcomm USB Drivers Download Drivers

❓ Frequently Asked Questions

  • Q: Can I use this firmware to unlock FRP?
    A: No, this firmware doesn't remove FRP. Use a separate FRP tool or method.
  • Q: My phone shows a black screen after flashing. What should I do?
    A: Ensure you used the correct build version. Try reflashing or clean format + download.
  • Q: Is this the official stock ROM?
    A: Yes, this is an official signed firmware from Vivo.

For more official stock ROMs and flashing tutorials, visit Firmware4Mobile.com Drop a comment below if you face any problem during flashing.

إرسال تعليق

0 تعليقات

Please Select Embedded Mode To show the Comment System.*

#buttons=(Ok, Go it!) #days=(20)

Our website uses cookies to enhance your experience. Check Now
Ok, Go it!