Vivo Y22 Flash File PD1309W_EX_B_5.3.11 | Official Firmware (MTK6582)
Facing boot logo, touch not working, or system crash issues on your Vivo Y22? You can now fix all software problems using the tested PD1309W_EX_B_5.3.11 firmware. This is the official MTK6582 scatter-based flash file for the Vivo Y22, compatible with the SP Flash Tool.
🛠 Common Software Issues Fixed
- Vivo Y22 stuck on boot logo / hang logo
- Touchscreen not working after flashing
- dm-verity verification failed
- Soft-bricked or dead boot problems
- Stuck in Fastboot or Recovery mode
⚠️ Pre-Flashing Requirements
- Ensure model is Vivo Y22 PD1309W
- Phone battery must be at least 60%
- Backup all user data before flashing
- Use a genuine USB cable for stable connection
📂 Vivo Y22 Firmware & Tool Download Links
File | Download |
---|---|
📁 Firmware: PD1309W_EX_B_5.3.11 (MTK) | Download Firmware |
⚙️ SP Flash Tool v5.1812 | Download SP Tool |
🔌 MTK USB Drivers | Download Drivers |
🧩 Flashing Method: How to Install Vivo Y22 Firmware
- Install MTK USB drivers on your PC
- Extract firmware and SP Tool using WinRAR or 7-Zip
- Run
flash_tool.exe
as Administrator - Click Scatter-loading and choose
MT6582_Android_scatter.txt
from the firmware folder - Select Download Only mode
- Turn off your Vivo Y22 completely
- Connect phone to PC while pressing the Volume Down key
- Flashing will begin automatically; wait for green success checkmark
- Disconnect phone and power it on normally
Note: If the device isn’t detected, retry using a different port or reinstall the MTK VCOM driver. Avoid interrupting the process once flashing starts.
🛠 Flash File Includes:
- Scatter File (MT6582)
- Boot.img, System.img, Recovery.img
- Preloader.bin, cache & userdata
- DA Auth file (if required)