Vivo Y22 Flash File (PD1309T_A_1.21.0) | Official Stock ROM + SP Flash Tool Guide
If your Vivo Y22 is stuck on boot logo, facing a black screen, or not powering on, this guide provides the official PD1309T_A_1.21.0 firmware to fix it. Using the tested MTK Scatter firmware and SP Flash Tool, you can repair dead boot, system crashes, and software-related issues.
🛠 What Problems This Firmware Fixes
- Vivo Y22 stuck on logo or bootloop
- Touch not responding after flashing
- dm-verity verification failed error
- Dead boot or soft brick issue
- Fastboot mode lock or software crash
📦 Download Vivo Y22 Firmware, Tool & USB Drivers
| File | Download |
|---|---|
| 📁 PD1309T_A_1.21.0 Stock ROM | Download Firmware |
| ⚙️ SP Flash Tool (v5.1812) | Download SP Tool |
| 🔌 MTK USB Drivers | Download Drivers |
⚠️ Important Precautions Before Flashing
- Make sure your phone is Vivo Y22 (PD1309T)
- Battery charge must be above 60%
- Backup personal data – flashing will erase everything
- Use only the matching firmware version for your device
📲 Step-by-Step: How to Flash Vivo Y22 Using SP Flash Tool
- Install MTK USB Drivers on your Windows PC
- Extract both firmware and SP Flash Tool using 7-Zip or WinRAR
- Open flash_tool.exe as Administrator
- Click on Scatter-loading and select
MT6582_Android_scatter.txtfrom the firmware folder - In the Download tab, select Download Only
- Power off your Vivo Y22 completely
- Connect the phone to PC while holding the Volume Down key
- Flashing will start automatically if the driver is properly installed
- Wait until you see a green OK icon
- Disconnect and power on the device