📥 Download Vivo Y21 Flash File (PD1309CW) – Official Stock ROM & Flashing Guide
If your Vivo Y21 is stuck on the logo, experiencing black screen issues, or has a dead boot problem, you're in the right place. This post provides the official Vivo Y21 firmware (PD1309CW) and a complete flashing tutorial using SP Flash Tool to restore your phone.
🧰 Common Software Problems Fixed by This Firmware
- Vivo Y21 stuck on boot logo or fastboot
- Touch not working after flash
- dm-verity verification failed error
- Black screen after system update
- Dead boot due to wrong flash file
🔗 Download Vivo Y21 Firmware, Tool & Drivers
| File Type | Download Link |
|---|---|
| 📁 Stock ROM Firmware | Download PD1309CW_ROM |
| ⚙️ SP Flash Tool | Download Flash Tool |
| 🔌 MTK USB Drivers | Download USB Drivers |
⚠️ Important Before You Flash
- Make sure your model is Vivo Y21 PD1309CW
- Charge the battery to at least 60%
- Use a stable USB cable and a reliable PC
- Take a full backup – flashing will erase all your phone data
📲 How to Flash Vivo Y21 Firmware with SP Flash Tool
- Install MediaTek USB Drivers on your computer
- Extract the firmware zip and SP Flash Tool using WinRAR or 7-Zip
- Launch SP Flash Tool and click Download tab
- Load the
MT6580_Android_Scatter.txtfile from the firmware folder - Load the DA Auth file if required
- Click the green “Download” button
- Power off the phone and press Volume Down or Volume Up key
- Connect the phone via USB to PC. Flashing will start automatically
- Wait until the “Download OK” popup appears
Note: If your Vivo Y21 is not detected, ensure drivers are installed and use another USB port or cable. You may try using MCT Bypass Tool if DA authentication is required.