📥 Vivo Y20G Flash File (PD2066F) | Fix Dead Boot, Black Screen, Touch Not Working
Is your Vivo Y20G stuck on logo, not booting, or showing software errors? This guide will help you download and flash the official Vivo Y20G PD2066F firmware using SP Flash Tool. Solve common issues like bootloop, dead boot, or screen not responding after update.
🛠️ Problems Solved by Flashing This Firmware
- Vivo Y20G stuck on boot logo or fastboot mode
- Touchscreen not working after flashing
- dm-verity verification failed error
- System UI crashes and restart loops
- Dead after flashing wrong ROM
🔗 Vivo Y20G Firmware, Tool & Drivers Download
| File Type | Download Link |
|---|---|
| 📁 Stock Firmware PD2066F | Download Firmware |
| ⚙️ SP Flash Tool (Modified) | Download Flash Tool |
| 🔌 MTK USB Drivers | Download Drivers |
⚠️ Important Notes Before Flashing
- Double-check that your phone model is Vivo Y20G PD2066F
- Charge your battery above 50%
- Flashing will erase all internal data — backup is recommended
- Use a working USB data cable to avoid connection issues
📲 How to Flash Vivo Y20G Firmware via SP Flash Tool
- Install the MTK USB Drivers on your PC
- Extract the downloaded firmware and tool using WinRAR or 7-Zip
- Launch the SP Flash Tool and go to the “Connection” tab
- Set
UARTand choose correct COM Port from Device Manager - Select
921600as Baud Rate - Load
MTK_AllInOne_DA.binin the “Download Agent” field - Click “Scatter-loading” and select the
MT6768_Android_scatter.txtfile from the ROM folder - Click the green “Download” button
- Power off your phone, press both volume keys, and connect to PC
- Flashing will begin. Wait for the success message
Note: If your PC doesn’t detect the phone, try another port or recheck the MTK drivers.
🧩 Test Point Image for Vivo Y20G
📌 Troubleshooting
If you encounter any error during flashing or your phone doesn't power on afterward, leave a comment or search for "Vivo Y20G Repair" on Firmware4Mobile.com to find tested methods and test point tutorials.