Vivo Y12S PD2036F Flash File Firmware Rom - | Fix Software Corruption and Slow Speed

Is your Vivo Y12s stuck on the logo, showing a black screen, or facing DM-Verity issues? Flashing the official Vivo Y12s stock ROM can resolve these problems quickly. This tested firmware (PD2036F) helps recover dead boot, fix software errors, and restore factory settings using SP Flash Tool.

✅ What Issues This Firmware Can Fix?

• Vivo Y12s stuck on logo / bootloop
• Fastboot or Recovery Mode issues
• Touch not working after update
• dm-verity verification failed error
• Dead Boot / Soft brick (no power)
• Hang on boot / black screen

⚠️ Precautions Before Flashing

⚠ Important: Only use firmware specific to your model and build (PD2036F_EX_A_1.73.10).
💾 Backup: Flashing will erase all personal data. Always back up photos, contacts, and apps before proceeding.
🔋 Battery: Charge your Vivo Y12s at least 60% before flashing.

📂 Required Tools & Drivers for Vivo Y12s

• SP Flash Tool (Kurdish Mod - v5.2044)
• MediaTek USB Drivers
• Firmware PD2036F_EX_A_1.73.10

🧰 How to Flash Vivo Y12s (Step-by-Step)

1. Install MTK USB drivers on your PC.
2. Extract the Vivo Y12s firmware package using WinRAR or 7-Zip.
3. Open MCT Bypass Tool and click the Bypass button.
4. Switch off the Vivo Y12s completely.
5. Press and hold both Volume Up + Down buttons.
6. While holding, connect the device to your PC via USB.
7. Open SP Flash Tool and go to the Connection tab.
8. Select UART and choose the correct COM Port from Device Manager.
9. Set the Baud Rate to 921600.
10. Load the DA File in the Download Agent section.
11. In Scatter-loading, browse and select MT65XX_Android_Scatter.txt from the firmware folder.
12. Click the Download button. Flashing will begin and complete with a success popup.

📦 Vivo Y12s Firmware Download Section

File Description	Download
📁 Stock ROM (PD2036F_EX_A_1.73.10)	Download
🛠 SP Flash Tool (Kurdish Edition)	Download
🧰 MTK USB Drivers	Download

💬 FAQs – Vivo Y12s Flash File

• Q: Is DA Auth file needed for Y12s?
  A: No separate DA required; use built-in DA from the firmware folder.
• Q: Can I flash using USB only?
  A: Yes, flashing is done via USB and SP Tool; test point not needed for most Y12s models.
• Q: Will this remove FRP Lock?
  A: No. Flashing will not bypass FRP. Use FRP tool separately.