Vivo X3F PD1227F Firmware Flash File | Latest Build for System Recovery

MR MOBILE
0

Vivo X3F Flash File Firmware (Stock ROM) – Software Repair Guide

If your Vivo X3F is stuck on the logo, not turning on, showing red/orange state, or has dm-verity verification failed error, then flashing the correct firmware will fix it. This official stock ROM helps recover dead boot, black screen after flash, touch not working, and many more problems.

Common Issues Fixed by Vivo X3F Firmware

  • Hang on logo / stuck on boot animation
  • After flash black screen or touch not working
  • Dead boot / no power issues
  • Red State / Orange State boot errors
  • Fastboot stuck or recovery loop
  • DM-Verity verification failed
  • FRP lock, screen lock, pin/password lock removal
  • Network/signal not working or SIM not detected
  • System apps crash: camera, dialer, contacts, Play Store
  • Google apps not working (Play Store, YouTube, Gmail crash)
  • Slow charging / fast charging message not showing
  • Display issues: shaking, white/black screen, red lines
  • App problems: WhatsApp not installing, TikTok hang, YouTube not opening
  • Speaker not working during call / screen turns off during calls
  • Overheating, device lagging, or freezing during games or camera use

Firmware Details:

  • Device: Vivo X3F
  • Chipset: Qualcomm
  • Flash Tool: QFIL via QPST
  • File Format: MBN, XML (Rawprogram + Patch)
Important: Always use the firmware that matches your device build number. Fully charge the battery before flashing. Backup your personal data, as flashing will erase everything.

How to Flash Vivo X3F Firmware Using QFIL (QPST)

  1. Download and install Qualcomm USB Drivers
  2. Download and extract the Vivo X3F Firmware
  3. Open QFIL Flash Tool from QPST package
  4. Select "Flat Build" and load the prog_emmc_firehose_****.mbn file
  5. Click "Load XML" and select rawprogram.xml then patch.xml
  6. Boot your device into EDL Mode (test point may be required)
  7. Connect phone via USB; Qualcomm HS-USB QDLoader 9008 should appear
  8. Click "Download" and flashing will begin

Flash Tool & QFIL Error Fixes

  • ERROR: S_AUTH_HANDLE_IS_NOT_READY – Use correct DA Auth file
  • ERROR: STATUS_EXT_RAM_EXCEPTION – Try different firmware version
  • Firehose Fail or Sahara Fail – Use compatible QFIL tool and drivers
  • Stuck at 0% – Replace USB cable or change port

Download Links

Vivo X3F Firmware & Tools
Vivo X3F Firmware (PD1227F QFIL)
QPST Tool (QFIL)
Qualcomm USB Drivers

Note: If you face any issue during flashing or download, please leave your question in the comments section.

Post a Comment

0 Comments

Please Select Embedded Mode To show the Comment System.*

#buttons=(Ok, Go it!) #days=(20)

Our website uses cookies to enhance your experience. Check Now
Ok, Go it!